POM
AdvancedPolyoxymethylene (Acetal / Delrin)
An engineering thermoplastic prized for its exceptional stiffness, low friction coefficient, and dimensional stability. POM (also known as Acetal or Delrin) is the go-to material for gears, bearings, and sliding mechanisms, but its poor bed adhesion and tendency to warp make it one of the hardest filaments to print successfully.
טמפ' חרירה200–220°C
טמפ' מצע100–130°C
מהירות הדפסה20–40 mm/s
טיפים להדפסה
- Bed adhesion is the biggest challenge — use a dedicated POM adhesion sheet or Magigoo POM glue for reliable first layers.
- Print on top of a POM or PP build surface; POM sticks best to its own material or polypropylene sheets.
- Keep the enclosure closed and warm (40-50°C ambient) to minimize warping and layer delamination.
- POM emits formaldehyde fumes when overheated — print in a ventilated space and never exceed 225°C.
- Use a brim of at least 10 mm and slow the first layer to 10 mm/s to fight the severe warping tendency.
- Avoid sharp corners in your designs — POM warps most aggressively at acute angles and thin walls.
מקרי שימוש
Gears, sprockets, and timing pulleysLow-friction bushings and bearingsSnap-fit clips requiring fatigue resistanceSliding mechanisms and linear guidesFood-contact conveyor components (FDA-approved grades)Precision jigs and fixtures
מדפסות תואמות
Find POM slicer settings for your printer — browse all printers and select POM from the filament selector.
Browse All Printers →קנייה אונליין
מומחה AI לפילמנט
AI Chat — Coming Soon for Pro subscribers
Ask anything about POM — printing tips, troubleshooting, material comparisons, and more.
פילמנטים נוספים
רוצים הגדרות AI מותאמות אישית?
תארו את ההגדרות שלכם ומה אתם מדפיסים בדיוק. מומחה ה-AI של 3DSearch יוצר הגדרות סלייסר מותאמות של POM למדפסת שלכם תוך שניות.
נסו את 3DSearch →