PAHT-CF

טיפים להדפסה

• An all-metal hotend capable of sustained 310 °C and a hardened-steel nozzle are both non-negotiable requirements.
• Dry at 90 °C for 12+ hours — PAHT-CF must be bone-dry to avoid steam pockets that catastrophically weaken layer bonds.
• An actively heated chamber (60-80 °C) is critical; without it, expect severe warping and delamination even on small parts.
• Print slowly at 25-35 mm/s with minimal to zero part-cooling fan for maximum interlayer fusion.
• Use Garolite (G10) build plates or apply a thin layer of PVA glue to PEI — PAHT-CF bonds aggressively and can damage unprotected surfaces.
• Route the filament path to minimize sharp bends; the stiff carbon-loaded filament can buckle in tight Bowden tubes.

מקרי שימוש

מדפסות תואמות

Find PAHT-CF slicer settings for your printer — browse all printers and select PAHT-CF from the filament selector.

קנייה אונליין

מומחה AI לפילמנט

פילמנטים נוספים