Kevlar Nylon

טיפים להדפסה

• A hardened-steel nozzle is required — aramid fibers are highly abrasive despite being softer than carbon or glass fibers.
• Dry at 75 °C for 8-10 hours; the nylon base is very hygroscopic and aramid fibers wick moisture along their length.
• Print in an enclosed chamber (45-55 °C) to control warping and maximize the toughness the aramid fibers provide.
• Use moderate speeds (25-35 mm/s for walls) to allow proper fiber distribution and consistent extrusion pressure.
• Increase infill density to 40-60% for impact-critical parts — Kevlar composites gain significantly more from infill than carbon variants.
• Avoid sharp corners in your model design where possible; aramid fibers perform best in gradual curves and distributed loads.

מקרי שימוש

מדפסות תואמות

Find Kevlar Nylon slicer settings for your printer — browse all printers and select Kevlar Nylon from the filament selector.

קנייה אונליין

מומחה AI לפילמנט

פילמנטים נוספים