Breakaway Support

Beginner

Mechanical Breakaway Support Material

A dedicated support filament engineered to peel away cleanly from the model with minimal force and no water bath. Breakaway support materials bond loosely to common filaments like PLA, PETG, and ABS, leaving a clean surface without the wait time of soluble supports.

טמפ' חרירה210–240°C

טמפ' מצע50–70°C

מהירות הדפסה30–50 mm/s

טיפים להדפסה

Set the support Z-distance to 0.1-0.15 mm in your slicer for easy removal without sacrificing support effectiveness.
Breakaway works best with 2-3 interface layers — too many layers makes removal difficult, too few causes poor surface quality.
Use pliers or a flat screwdriver to initiate the peel; once started, the support strips off in clean sheets.
Print at the same speed as your model material — breakaway filaments are designed to match PLA/PETG flow rates.
Breakaway is faster than soluble supports since there is no dissolution wait time — ideal for production workflows.

מקרי שימוש

Support structures for PLA and PETG printsRapid prototyping where support removal speed mattersProduction runs with consistent support requirementsParts with moderate overhangs (45-70°) that need clean undersidesPrints where water exposure is undesirable (embedded electronics)Multi-material setups as an alternative to PVA or BVOH

מדפסות תואמות

Find Breakaway Support slicer settings for your printer — browse all printers and select Breakaway Support from the filament selector.

Browse All Printers →

קנייה אונליין

Ultimaker Breakaway Filament→Polymaker PolySupport Breakaway→Bambu Lab Support for PLA→

מומחה AI לפילמנט

AI Chat — Coming Soon for Pro subscribers

Ask anything about Breakaway Support — printing tips, troubleshooting, material comparisons, and more.

פילמנטים נוספים