ABS-CF
AdvancedCarbon-fiber Reinforced Acrylonitrile Butadiene Styrene
ABS-CF adds chopped carbon fibers to an ABS base, boosting rigidity and dimensional stability while reducing the warping tendency that plagues plain ABS. The result is a stiff, lightweight composite that vapor-smooths with acetone just like standard ABS, enabling both engineering performance and a polished cosmetic finish.
טמפ' חרירה240–260°C
טמפ' מצע90–110°C
מהירות הדפסה30–50 mm/s
טיפים להדפסה
- Use a hardened-steel nozzle (0.4 mm minimum) — carbon fibers wear brass nozzles rapidly, causing dimensional inaccuracy.
- An enclosed printer with stable chamber temperature (45-55 °C) is strongly recommended to prevent layer splitting.
- Dry at 65 °C for 4-6 hours before use; ABS-CF is less moisture-sensitive than nylon composites but still benefits from drying.
- Reduce retraction to 1-3 mm to avoid fiber jamming at the heat break, especially with Bowden setups.
- Acetone vapor smoothing works on ABS-CF just like plain ABS — use it for a professional, sealed surface finish.
מקרי שימוש
Stiff structural prototypesAutomotive interior trim and bracketsRC car chassis and componentsCamera and electronics mountsDrone motor mountsTooling masters for thermoformingCosmetically finished functional parts (vapor smoothed)
מדפסות תואמות
Find ABS-CF slicer settings for your printer — browse all printers and select ABS-CF from the filament selector.
Browse All Printers →קנייה אונליין
מומחה AI לפילמנט
AI Chat — Coming Soon for Pro subscribers
Ask anything about ABS-CF — printing tips, troubleshooting, material comparisons, and more.
פילמנטים נוספים
ABS-CF guides
רוצים הגדרות AI מותאמות אישית?
תארו את ההגדרות שלכם ומה אתם מדפיסים בדיוק. מומחה ה-AI של 3DSearch יוצר הגדרות סלייסר מותאמות של ABS-CF למדפסת שלכם תוך שניות.
נסו את 3DSearch →