PA12-CF
AdvancedCarbon-fiber Reinforced Polyamide 12
PA12-CF pairs chopped carbon fibers with PA12 nylon, resulting in a composite that is stiffer and more dimensionally stable than plain PA12 while being easier to print than PA6-CF due to lower moisture sensitivity. It is widely used as a direct replacement for machined aluminum in lightweight structural applications.
حرارة الفوهة260–280°C
حرارة المنصة80–100°C
سرعة الطباعة25–45 mm/s
نصائح الطباعة
- Use a hardened-steel or ruby nozzle — carbon fibers are extremely abrasive and will damage brass within a single print.
- Dry at 70 °C for 6-8 hours before printing; PA12 absorbs less moisture than PA6 but fibers trap surface moisture.
- An enclosed build chamber at 45-55 °C keeps warping under control on parts longer than 100 mm.
- Print walls at 25-35 mm/s for optimal fiber alignment and surface quality; infill can run up to 45 mm/s.
- Keep retractions short (1-2 mm) and slow (15-25 mm/s) to prevent fiber clogging at the heat break.
- Increase wall count to 3-4 perimeters to fully leverage the carbon-fiber stiffness in the print direction.
حالات الاستخدام
Aluminum-replacement structural partsDrone frame plates and armsPrecision jigs and assembly fixturesLightweight camera and gimbal mountsAutomotive performance bracketsProsthetic structural componentsRobotics end-effector housingsSatellite and space-related prototypes
الطابعات المتوافقة
Find PA12-CF slicer settings for your printer — browse all printers and select PA12-CF from the filament selector.
Browse All Printers →الشراء عبر الإنترنت
خبير AI للخيوط
AI Chat — Coming Soon for Pro subscribers
Ask anything about PA12-CF — printing tips, troubleshooting, material comparisons, and more.
خيوط أخرى
PA12-CF guides
هل تريد إعدادات AI مخصصة؟
صِف إعداداتك وما تطبعه بالضبط. يُنشئ خبير AI من 3DSearch إعدادات تقطيع مخصصة لـ PA12-CF لطابعتك في ثوانٍ.
جرّب 3DSearch ←