Carbon Fiber PETG

Intermediate

Carbon Fiber Reinforced PETG

PETG reinforced with short carbon fiber strands for significantly increased stiffness and a professional matte black finish. Easier to print than carbon fiber nylon while offering excellent rigidity. A hardened steel nozzle is mandatory.

حرارة الفوهة230–260°C

حرارة المنصة70–85°C

سرعة الطباعة30–50 mm/s

نصائح الطباعة

A hardened steel nozzle (0.5mm+) is mandatory — carbon fibers destroy brass nozzles in a single print.
Dry at 65°C for 8 hours. CF-PETG absorbs moisture faster than plain PETG due to the fiber wicking effect.
Keep fan at 30-50% — enough to handle overhangs without causing layer delamination.
CF composites are stiffer but more brittle. Design parts with radii instead of sharp corners to prevent cracking.
Use 3-4 walls minimum. Carbon fiber adds stiffness but wall count determines actual part strength.

حالات الاستخدام

Drone frames and armsCamera mounting bracketsStructural brackets and fixturesLaptop and tablet standsRC vehicle chassis platesTool jigs and work-holding fixturesLightweight structural panels

الطابعات المتوافقة

Find Carbon Fiber PETG slicer settings for your printer — browse all printers and select Carbon Fiber PETG from the filament selector.

Browse All Printers →

الشراء عبر الإنترنت

Polymaker PETG-CF 1.75mm→Overture CF-PETG 1.75mm→Priline PETG-CF 1.75mm→

خبير AI للخيوط

AI Chat — Coming Soon for Pro subscribers

Ask anything about Carbon Fiber PETG — printing tips, troubleshooting, material comparisons, and more.