HIPS Settings for Voxelab Aquila
Recommended slicer settings for printing HIPS on the Voxelab Aquila (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
Slicer Yapılandırması
Bu değerleri slicer'ına (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio) kopyala| Ayar | Değer | Aralık |
|---|---|---|
| Nozzle Sıcaklığı | 238°C | 230-245°C |
| Platform Sıcaklığı | 100°C | 90-110°C |
| İlk Katman Nozzle | 243°C | +5°C above normal |
| İlk Katman Platform | 100°C | At printer max |
| Baskı Hızı | 45 mm/s | 40-50 mm/s |
| İlk Katman Hızı | 20 mm/s | 25-50% of normal |
| Duvar Hızı | 34 mm/s | 70-80% of normal |
| Hareket Hızı | 75 mm/s | 120-150% of print speed |
| Katman Yüksekliği | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Duvar Sayısı | 2-3 | Perimeters/shells |
| Üst/Alt Katmanlar | 3-4 | Solid layers |
| Soğutma Vantilatörü | 0-10% | From layer 2+ |
| Geri Çekilme Mesafesi | 4-6 mm | Bowden |
| Geri Çekilme Hızı | 40 mm/s | Bowden |
Yazdırmadan Önce
Baskı Kalitesi Profilleri
Three presets for common use cases with HIPS on the Voxelab Aquila.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 50 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 45 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 40 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Platform Yapışması
HIPS PEI levhalarına ve glue stick ile cam yatağa çok iyi yapışır. Yapışma ABS'ye benzer ancak çoğunlukla daha iyidir. Etek isteğe bağlıdır.
Sıcaklık Ayarlama Rehberi
Nozzle: 238°C
Range: 230-245°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 90-110°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
HIPS ile Voxelab Aquila üzerinde sorun giderme
HIPS için Pro İpuçları
HIPS, PLA ana model ile birlikte çözülebilir destek malzemesi için idealdir
240-250°C'de yazdır, normal ABS'den biraz daha yüksek
Baskı sonrası modelleri D-Limonene'ye batır desteği çözmek için
D-Limonene aseton'dan daha güvenli ve daha hoş kokuludur
HIPS, birleştirilmiş yazdırma için PLA ana malzemesine iyi yapışır - malzeme temiz ayrılır
Destek Ayarları
HIPS is best used as a support material for ABS, dissolved in D-Limonene. For standalone HIPS prints, use tree or organic supports with 0.2mm interface gap.
Voxelab Aquila Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
HIPS Properties
| Nozzle Range | 230-245°C |
| Bed Range | 90-110°C |
| Speed Range | 40-50 mm/s |
| Difficulty | intermediate |
| Drying | Not required |
| Enclosure | Recommended |
HIPS Bir Bakışta
Güçlü Yönleri
- Dissolves in D-Limonene (support material for ABS)
- Much cheaper than PVA ($20-25/kg)
- Low moisture sensitivity
- Can be used as standalone lightweight material
- Easy to paint and post-process
Zayıf Yönleri
- Requires D-Limonene solvent
- Only pairs well with ABS
- Needs enclosure (same as ABS)
- Less common than PVA for support use
Kişiselleştirilmiş yapay zeka ayarları ister misin?
Tam kurulumunu ve ne yazdırdığını açıkla. 3DSearch'ün yapay zeka uzmanı saniyeler içinde HIPS ile Voxelab Aquila için özel slicer ayarları oluşturuyor.
3DSearch'ü dene →Kaynaklar: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Değerler filament belirtimleri ve yazıcı donanım sınırlarından hesaplanmıştır.