POM Settings for Voxelab Aquila
Recommended slicer settings for printing POM on the Voxelab Aquila (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 210°C | 200-220°C |
| 热床温度 | 100°C | 100-130°C |
| 首层喷嘴 | 215°C | +5°C above normal |
| 首层热床 | 100°C | At printer max |
| 打印速度 | 30 mm/s | 20-40 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 23 mm/s | 70-80% of normal |
| 空走速度 | 60 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 2-3 | Perimeters/shells |
| 顶层/底层 | 3-4 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 4-6 mm | Bowden |
| 回抽速度 | 40 mm/s | Bowden |
开始打印前
打印质量预设
Three presets for common use cases with POM on the Voxelab Aquila.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 40 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 30 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 20 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
POM(乙醛/Delrin)对大多数表面的粘合极其差。使用专用 POM 热床或涂 POM 浆液(POM 废料溶解在溶剂中)。蓝色美纹纸单独很少起作用。裙边至关重要。某些用户报告粗糙 PEI 片和胶棒的成功,但结果不一致。
温度调校指南
Nozzle: 210°C
Range: 200-220°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 100-130°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Voxelab Aquila 上打印 POM 的问题排查
POM 使用技巧
POM(Delrin/乙醛)是最难粘合到热床表面的耗材之一
使用 POM 专用热床或 POM 浆液以获得热床粘合
外罩至关重要;POM 收缩 2-3% 并翘曲猛烈
POM 在齿轮、轴承和需要低摩擦和高耐磨的零件中表现出色
支撑设置
For prints requiring supports with POM, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Voxelab Aquila Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
POM Properties
| Nozzle Range | 200-220°C |
| Bed Range | 100-130°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Drying | 60°C / 6h |
| Enclosure | Not needed |
POM 速览
优势
- Lowest friction of any printable plastic
- Replaces machined Delrin/Acetal parts
- Self-lubricating — ideal for gears and bearings
- Excellent fatigue resistance
劣势
- Extremely difficult bed adhesion
- Requires POM-specific build surface or tape
- Emits formaldehyde fumes — ventilation required
- Very few printers handle it well
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Voxelab Aquila 搭配 POM 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。