TPU 87A Settings for Voxelab Aquila
Recommended slicer settings for printing TPU 87A on the Voxelab Aquila (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
Slicer Configuration
Copy these values into your slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Setting | Value | Range |
|---|---|---|
| Nozzle Temperature | 223°C | 210-235°C |
| Bed Temperature | 50°C | 40-60°C |
| First Layer Nozzle | 228°C | +5°C above normal |
| First Layer Bed | 55°C | +5°C above normal |
| Print Speed | 18 mm/s | 10-25 mm/s |
| First Layer Speed | 15 mm/s | 25-50% of normal |
| Wall Speed | 14 mm/s | 70-80% of normal |
| Travel Speed | 38 mm/s | 120-150% of print speed |
| Layer Height | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Wall Count | 3-4 | Perimeters/shells |
| Top/Bottom Layers | 5-6 | Solid layers |
| Cooling Fan | 100% | From layer 2+ |
| Retraction Distance | 4-6 mm | Bowden |
| Retraction Speed | 40 mm/s | Bowden |
Before You Print
Print Quality Profiles
Three presets for common use cases with TPU 87A on the Voxelab Aquila.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 25 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 18 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 10 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Bed Adhesion
TPU 87A (Shore 87A, very soft) adheres well to PEI sheets and painter's tape. The extreme flexibility makes bed removal easy. Slow first-layer speed is critical for consistent adhesion.
Temperature Tuning Guide
Nozzle: 223°C
Range: 210-235°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Troubleshooting TPU 87A on Voxelab Aquila
Pro Tips for TPU 87A
Shore 87A is very soft and difficult to print -- only attempt with direct drive extruders
Print extremely slowly: 15-25 mm/s; even experienced users struggle above 30 mm/s
Almost no retraction (0-0.3mm) -- the material is too soft for conventional retraction
Results are rewarding: 87A produces rubber-like parts with excellent elasticity
Support Settings
For prints requiring supports with TPU 87A, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Voxelab Aquila Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
TPU 87A Properties
| Nozzle Range | 210-235°C |
| Bed Range | 40-60°C |
| Speed Range | 10-25 mm/s |
| Difficulty | advanced |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPU 87A at a Glance
Strengths
- Very soft and flexible — Shore 87A
- Ideal for gaskets, seals, soft grips
- Excellent shock absorption
- Stretches 500%+ before breaking
Weaknesses
- Direct drive extruder required
- Extremely slow print speeds
- Very difficult to control retraction
- Prone to jamming in Bowden tubes
Want personalized AI settings?
Describe your exact setup and what you are printing. 3DSearch's AI expert generates custom slicer settings for your Voxelab Aquila with TPU 87A in seconds.
Try 3DSearch →Sources: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Values calculated from filament specifications and printer hardware limits.