TPC Settings for Voxelab Aquila
Recommended slicer settings for printing TPC on the Voxelab Aquila (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
Configuración del Slicer
Copia estos valores en tu slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Configuración | Valor | Rango |
|---|---|---|
| Temperatura de Boquilla | 225°C | 210-240°C |
| Temperatura de Cama | 50°C | 40-60°C |
| Primera Capa de Boquilla | 230°C | +5°C above normal |
| Primera Capa de Cama | 55°C | +5°C above normal |
| Velocidad de Impresión | 23 mm/s | 15-30 mm/s |
| Velocidad de Primera Capa | 15 mm/s | 25-50% of normal |
| Velocidad de Paredes | 17 mm/s | 70-80% of normal |
| Velocidad de Viaje | 45 mm/s | 120-150% of print speed |
| Altura de Capa | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Número de Paredes | 3-4 | Perimeters/shells |
| Capas Superiores/Inferiores | 5-6 | Solid layers |
| Ventilador de Enfriamiento | 100% | From layer 2+ |
| Distancia de Retracción | 4-6 mm | Bowden |
| Velocidad de Retracción | 40 mm/s | Bowden |
Antes de Imprimir
Perfiles de Calidad de Impresión
Three presets for common use cases with TPC on the Voxelab Aquila.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 30 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 23 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 15 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Adhesión de Cama
TPC se adhiere a planchas PEI y camas de cristal. La adhesión es similar a TPU.
Guía de Sintonización de Temperatura
Nozzle: 225°C
Range: 210-240°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Solución de problemas TPC en Voxelab Aquila
Consejos Profesionales para TPC
TPC es copoliéster termoplástico - flexible como TPU pero algo más rígido
Imprime lentamente - 20-40 mm/s
Se recomienda encarecidamente Direct Drive
Minimiza retracción - 0.5-1mm es suficiente
El material es ideal para piezas flexibles
Configuración de Soportes
For prints requiring supports with TPC, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Voxelab Aquila Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
TPC Properties
| Nozzle Range | 210-240°C |
| Bed Range | 40-60°C |
| Speed Range | 15-30 mm/s |
| Difficulty | intermediate |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPC de un Vistazo
Fortalezas
- Flexible co-polyester — better chemical resistance than TPU
- Good UV resistance for outdoor flexible parts
- Better printability than TPE
- Good temperature resistance
Debilidades
- Less flexible than TPU at same hardness
- More expensive than TPU
- Limited brand availability
- Fewer color options
¿Quieres configuraciones de IA personalizadas?
Describe tu configuración exacta y qué estás imprimiendo. El experto en IA de 3DSearch genera configuraciones de slicer personalizadas para tu Voxelab Aquila con TPC en segundos.
Prueba 3DSearch →Fuentes: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valores calculados a partir de especificaciones de filamento y límites de hardware de impresora.