PLA+ Settings for Voxelab Aquila X2
Recommended slicer settings for printing PLA+ on the Voxelab Aquila X2 (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 215°C | 200-230°C |
| 热床温度 | 60°C | 50-70°C |
| 首层喷嘴 | 220°C | +5°C above normal |
| 首层热床 | 65°C | +5°C above normal |
| 打印速度 | 50 mm/s | 40-60 mm/s |
| 首层速度 | 20 mm/s | 25-50% of normal |
| 外壁速度 | 38 mm/s | 70-80% of normal |
| 空走速度 | 90 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 2-3 | Perimeters/shells |
| 顶层/底层 | 3-4 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 4-6 mm | Bowden |
| 回抽速度 | 40 mm/s | Bowden |
开始打印前
打印质量预设
Three presets for common use cases with PLA+ on the Voxelab Aquila X2.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 60 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 50 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 40 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
PLA+ 与普通 PLA 具有相同的粘合特性。干净的 PEI 片可完美工作。对于玻璃热床,使用胶棒或发胶。打印前用 IPA 清洁。
温度调校指南
Nozzle: 215°C
Range: 200-230°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 60°C
Range: 50-70°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Voxelab Aquila X2 上打印 PLA+ 的问题排查
PLA+ 使用技巧
PLA+ 通常比普通 PLA 需要高 5-10°C 的喷嘴温度
与普通 PLA 一样储存 -- 干燥剂和密闭容器
测试不同品牌,因为 PLA+ 未标准化且差异很大
PLA+ 的优势在抗冲击性和脆性断裂减少中最明显
对于需要更好耐久性的功能性零件,是从 PLA 升级的好选择
支撑设置
For prints requiring supports with PLA+, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Voxelab Aquila X2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
PLA+ Properties
| Nozzle Range | 200-230°C |
| Bed Range | 50-70°C |
| Speed Range | 40-60 mm/s |
| Difficulty | beginner |
| Drying | Not required |
| Enclosure | Not needed |
PLA+ 速览
优势
- Up to 4x better impact resistance than PLA
- Higher heat tolerance (70-80C vs 55-60C for PLA)
- Better layer adhesion
- Less brittle than standard PLA
- Same ease of printing as PLA
劣势
- Not a standardized spec (varies by brand)
- Slightly more expensive than PLA
- Some brands offer little improvement over regular PLA
- Still not suitable for high-heat or heavy-load applications
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Voxelab Aquila X2 搭配 PLA+ 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。