PC Settings for Markforged Mark Two
Recommended slicer settings for printing PC on the Markforged Mark Two (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
不兼容advanced
不兼容
The max bed temperature of 0°C is below the recommended 100°C for PC. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 260-310°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 100-120°C |
| Printer Max Bed | N/A |
该怎么办
- Your printer's bed maxes out at 0°C, but PC needs at least 100°C for reliable adhesion.
- Try a compatible filament for your Markforged Mark Two — PLA, PETG, and ABS are good options.
- If you need PC specifically, you'll need a printer with a hotend capable of 260°C+ nozzle and 100°C+ heated bed.
PC Requirements
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 80°C / 10h |
Markforged Mark Two Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
PC 速览
优势
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
劣势
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Markforged Mark Two 搭配 PC 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。