PC Settings for Bambu Lab A1
Recommended slicer settings for printing PC on the Bambu Lab A1 (256 x 256 x 256 mm build volume, 500 mm/s max speed, direct drive extruder).
Slicer Yapılandırması
Bu değerleri slicer'ına (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio) kopyala| Ayar | Değer | Aralık |
|---|---|---|
| Nozzle Sıcaklığı | 285°C | 260-310°C |
| Platform Sıcaklığı | 100°C | 100-120°C |
| İlk Katman Nozzle | 290°C | +5°C above normal |
| İlk Katman Platform | 100°C | At printer max |
| Baskı Hızı | 30 mm/s | 20-40 mm/s |
| İlk Katman Hızı | 15 mm/s | 25-50% of normal |
| Duvar Hızı | 23 mm/s | 70-80% of normal |
| Hareket Hızı | 60 mm/s | 120-150% of print speed |
| Katman Yüksekliği | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Duvar Sayısı | 2-3 | Perimeters/shells |
| Üst/Alt Katmanlar | 3-4 | Solid layers |
| Soğutma Vantilatörü | 0-10% | From layer 2+ |
| Geri Çekilme Mesafesi | 0.8-1.2 mm | Direct drive |
| Geri Çekilme Hızı | 40 mm/s | Direct drive |
Yazdırmadan Önce
Baskı Kalitesi Profilleri
Three presets for common use cases with PC on the Bambu Lab A1.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 40 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 30 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 20 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Platform Yapışması
PC (Polikarbonat) PEI levhalarına ve ABS reçinesi ile cam yatağa iyi yapışır. Yapışma güvenilirdir. Büyük parçalar için etek önerilir.
Sıcaklık Ayarlama Rehberi
Nozzle: 285°C
Range: 260-310°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 100-120°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
PC ile Bambu Lab A1 üzerinde sorun giderme
PC için Pro İpuçları
PC yüksek sıcaklıklar (280-310°C) gerektirir ve bu nedenle çoğu yazıcı için uygun değildir
Isıtmalı kasa çok tavsiye edilir
Çok yavaş yazdır - maksimum 30-40 mm/s
PC son derece esnek ve şeffaf - fonksiyonel parçalar için idealdir
Malzeme pahalı - dikkatle planla
Destek Ayarları
For prints requiring supports with PC, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Bambu Lab A1 Specs
| Build Volume | 256 x 256 x 256 mm |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Drying | 80°C / 10h |
| Enclosure | Recommended |
PC Bir Bakışta
Güçlü Yönleri
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
Zayıf Yönleri
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
Kişiselleştirilmiş yapay zeka ayarları ister misin?
Tam kurulumunu ve ne yazdırdığını açıkla. 3DSearch'ün yapay zeka uzmanı saniyeler içinde PC ile Bambu Lab A1 için özel slicer ayarları oluşturuyor.
3DSearch'ü dene →Kaynaklar: Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. Değerler filament belirtimleri ve yazıcı donanım sınırlarından hesaplanmıştır.