PC Settings for Bambu Lab A1 Combo
Recommended slicer settings for printing PC on the Bambu Lab A1 Combo (256 x 256 x 256 mm build volume, 500 mm/s max speed, direct drive extruder).
Slicer-configuratie
Kopieer deze waarden naar je slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Instelling | Waarde | Bereik |
|---|---|---|
| Mondstuktemperatuur | 285°C | 260-310°C |
| Bedtemperatuur | 100°C | 100-120°C |
| Eerste laag mondstuk | 290°C | +5°C above normal |
| Eerste laag bed | 100°C | At printer max |
| Afdruksnelheid | 30 mm/s | 20-40 mm/s |
| Eerste laag snelheid | 15 mm/s | 25-50% of normal |
| Muursnelheid | 23 mm/s | 70-80% of normal |
| Reissnelheid | 60 mm/s | 120-150% of print speed |
| Laagdikte | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Muurantal | 2-3 | Perimeters/shells |
| Boven-/onderlagen | 3-4 | Solid layers |
| Koelventilator | 0-10% | From layer 2+ |
| Intrekngsafstand | 0.8-1.2 mm | Direct drive |
| Intreksnelheid | 40 mm/s | Direct drive |
Voordat je afdrukt
Afdrukprofielen kwaliteit
Three presets for common use cases with PC on the Bambu Lab A1 Combo.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 40 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 30 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 20 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Adhesie bed
PC (Polycarbonaat) hecht goed aan PEI-platen en glazen bedden met ABS-slijm. Hechting is betrouwbaar. Een rand wordt aanbevolen voor grote onderdelen.
Temperatuurafstemmingsgids
Nozzle: 285°C
Range: 260-310°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 100-120°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Problemen oplossen PC op Bambu Lab A1 Combo
Pro tips voor PC
PC vereist hoge temperaturen (280-310°C) en is daarmee niet geschikt voor veel printers
Verwarmd omhulsel wordt sterk aanbevolen
Druk zeer langzaam - maximaal 30-40 mm/s
PC is extreem taai en transparant - ideaal voor functionele onderdelen
Materiaal is duur - plan zorgvuldig
Ondersteuningsinstellingen
For prints requiring supports with PC, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Bambu Lab A1 Combo Specs
| Build Volume | 256 x 256 x 256 mm |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Drying | 80°C / 10h |
| Enclosure | Recommended |
PC in één oogopslag
Sterke punten
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
Zwakke punten
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
Wil je gepersonaliseerde AI-instellingen?
Beschrijf je exacte setup en wat je afdrukt. 3DSearch's AI-expert genereert in seconden aangepaste slicer-instellingen voor je Bambu Lab A1 Combo met PC.
Probeer 3DSearch →Bronnen: Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. Waarden berekend op basis van filamentspecificaties en printerhard warelimiet.