ABS-CF Settings for Monoprice MP Voxel
Recommended slicer settings for printing ABS-CF on the Monoprice MP Voxel (150 x 150 x 150 mm build volume, 100 mm/s max speed, direct drive extruder).
Não Compatíveladvanced
Não Compatível
The max bed temperature of 60°C is below the recommended 90°C for ABS-CF. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 240-260°C |
| Printer Max Nozzle | 260°C |
| Filament Bed Requirement | 90-110°C |
| Printer Max Bed | 60°C |
O que fazer em vez disso
- Your printer's bed maxes out at 60°C, but ABS-CF needs at least 90°C for reliable adhesion.
- Try a compatible filament for your Monoprice MP Voxel — PLA, PETG, and ABS are good options.
- If you need ABS-CF specifically, you'll need a printer with a hotend capable of 240°C+ nozzle.
ABS-CF Requirements
ABS-CF Properties
| Nozzle Range | 240-260°C |
| Bed Range | 90-110°C |
| Speed Range | 30-50 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 77°C / 6h |
Monoprice MP Voxel Specs
| Build Volume | 150 x 150 x 150 mm |
| Max Speed | 100 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 60°C |
| Extruder | Direct Drive |
ABS-CF em Primeiro Lugar
Forças
- Much stiffer than standard ABS with less warping
- Good heat resistance (similar to ABS, HDT ~100C)
- Professional matte black finish
- Better dimensional accuracy than plain ABS
- Ideal for functional parts needing rigidity and heat resistance
Fraquezas
- Requires hardened steel nozzle (carbon fibers destroy brass)
- Enclosure required (emits fumes like ABS)
- More brittle than standard ABS (reduced impact resistance)
- Use 0.5mm+ nozzle to avoid clogging from fibers
- Poor UV resistance (same as ABS, consider ASA-CF for outdoor use)
Quer configurações de IA personalizadas?
Descreva sua configuração exata e o que está imprimindo. O especialista em IA do 3DSearch gera configurações personalizadas do slicer para seu Monoprice MP Voxel com ABS-CF em segundos.
Experimente 3DSearch →Fontes: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valores calculados a partir de especificações de filamento e limites de hardware da impressora.