ABS-CF Settings for Monoprice Maker Select V2
Recommended slicer settings for printing ABS-CF on the Monoprice Maker Select V2 (200 x 200 x 180 mm build volume, 150 mm/s max speed, Bowden extruder).
Slicer Configuration
Copy these values into your slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Setting | Value | Range |
|---|---|---|
| Nozzle Temperature | 250°C | 240-260°C |
| Bed Temperature | 100°C | 90-110°C |
| First Layer Nozzle | 255°C | +5°C above normal |
| First Layer Bed | 100°C | At printer max |
| Print Speed | 40 mm/s | 30-50 mm/s |
| First Layer Speed | 15 mm/s | 25-50% of normal |
| Wall Speed | 30 mm/s | 70-80% of normal |
| Travel Speed | 75 mm/s | 120-150% of print speed |
| Layer Height | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Wall Count | 2-3 | Perimeters/shells |
| Top/Bottom Layers | 3-4 | Solid layers |
| Cooling Fan | 0-10% | From layer 2+ |
| Retraction Distance | 4-6 mm | Bowden |
| Retraction Speed | 40 mm/s | Bowden |
Before You Print
Print Quality Profiles
Three presets for common use cases with ABS-CF on the Monoprice Maker Select V2.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 50 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 40 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 30 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Bed Adhesion
ABS-CF uses the same adhesion methods as standard ABS. Use a PEI sheet at 90-110°C with ABS slurry or glue stick. A brim is strongly recommended. The carbon fibers reduce warping compared to plain ABS, but an enclosure is still essential.
Temperature Tuning Guide
Nozzle: 250°C
Range: 240-260°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 90-110°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Troubleshooting ABS-CF on Monoprice Maker Select V2
Pro Tips for ABS-CF
A hardened steel nozzle (0.5mm+) is mandatory for carbon fiber filaments
An enclosure is non-negotiable -- ABS-CF warps like ABS but the fibers help with dimensional stability
Dry filament at 77°C for 6+ hours before printing; moisture causes bubbling and weak layers
ABS-CF produces less warping than plain ABS due to the carbon fibers reducing shrinkage
For outdoor applications, consider ASA-based composites instead -- ABS-CF yellows in sunlight
Support Settings
For prints requiring supports with ABS-CF, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Monoprice Maker Select V2 Specs
| Build Volume | 200 x 200 x 180 mm |
| Max Speed | 150 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
ABS-CF Properties
| Nozzle Range | 240-260°C |
| Bed Range | 90-110°C |
| Speed Range | 30-50 mm/s |
| Difficulty | advanced |
| Drying | 77°C / 6h |
| Enclosure | Recommended |
ABS-CF at a Glance
Strengths
- Much stiffer than standard ABS with less warping
- Good heat resistance (similar to ABS, HDT ~100C)
- Professional matte black finish
- Better dimensional accuracy than plain ABS
- Ideal for functional parts needing rigidity and heat resistance
Weaknesses
- Requires hardened steel nozzle (carbon fibers destroy brass)
- Enclosure required (emits fumes like ABS)
- More brittle than standard ABS (reduced impact resistance)
- Use 0.5mm+ nozzle to avoid clogging from fibers
- Poor UV resistance (same as ABS, consider ASA-CF for outdoor use)
Want personalized AI settings?
Describe your exact setup and what you are printing. 3DSearch's AI expert generates custom slicer settings for your Monoprice Maker Select V2 with ABS-CF in seconds.
Try 3DSearch →Sources: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Values calculated from filament specifications and printer hardware limits.