PA12-CF Settings for Voxelab Aquila X2
Recommended slicer settings for printing PA12-CF on the Voxelab Aquila X2 (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
Конфигурация слайсера
Скопируй эти значения в свой слайсер (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Параметр | Значение | Диапазон |
|---|---|---|
| Температура сопла | 260°C | 260-280°C |
| Температура стола | 90°C | 80-100°C |
| Сопло первого слоя | 260°C | At printer max |
| Стол первого слоя | 95°C | +5°C above normal |
| Скорость печати | 35 mm/s | 25-45 mm/s |
| Скорость первого слоя | 15 mm/s | 25-50% of normal |
| Скорость стен | 26 mm/s | 70-80% of normal |
| Скорость холостого хода | 68 mm/s | 120-150% of print speed |
| Высота слоя | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Количество стен | 2-3 | Perimeters/shells |
| Верхние/нижние слои | 3-4 | Solid layers |
| Вентилятор охлаждения | 0-10% | From layer 2+ |
| Расстояние втягивания | 4-6 mm | Bowden |
| Скорость втягивания | 40 mm/s | Bowden |
Перед печатью
Профили качества печати
Three presets for common use cases with PA12-CF on the Voxelab Aquila X2.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 45 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 35 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 25 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Адгезия стола
PA12 Carbon Fiber прилипает как обычный nylon с дополнительной шероховатостью волокон. Используй текстурированный PEI или Garolite с клеевым стиком.
Руководство по регулировке температуры
Nozzle: 260°C
Range: 260-280°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 90°C
Range: 80-100°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Устранение неполадок PA12-CF на Voxelab Aquila X2
Советы профессионалов для PA12-CF
Закаленное стальное сопло необходимо для PA12 Carbon Fiber
Печатай при более высоких температурах, как обычный nylon плюс 5-10°C
Повысь расход на 15% из-за плотности частиц
PA12 Carbon Fiber исключительно стабилен и идеален для конструктивных приложений
Просушь перед печатью - nylon-варианты гигроскопичны
Параметры поддержки
For prints requiring supports with PA12-CF, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Voxelab Aquila X2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
PA12-CF Properties
| Nozzle Range | 260-280°C |
| Bed Range | 80-100°C |
| Speed Range | 25-45 mm/s |
| Difficulty | advanced |
| Drying | 80°C / 12h |
| Enclosure | Recommended |
PA12-CF с первого взгляда
Сильные стороны
- Exceptional stiffness-to-weight ratio
- Excellent heat resistance (HDT ~140C under load)
- Lower moisture absorption than PA6-CF
- Professional matte finish with dimensional stability
- Ideal for high-performance jigs, drone frames, and tooling
Слабые стороны
- Requires hardened steel nozzle (mandatory)
- Requires all-metal hotend for 260-280C range
- Must be dried extensively and printed from dry box
- Enclosure required to prevent warping and delamination
- Expensive (~$50-80/kg) and limited color options
Хочешь персонализированные параметры ИИ?
Опиши свою точную конфигурацию и то, что ты печатаешь. Эксперт ИИ 3DSearch генерирует пользовательские параметры слайсера для твоего Voxelab Aquila X2 с PA12-CF за секунды.
Попробуй 3DSearch →Источники: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Значения рассчитаны на основе спецификаций филамента и ограничений аппаратного обеспечения принтера.