TPU 87A Settings for Voxelab Aquila X2
Recommended slicer settings for printing TPU 87A on the Voxelab Aquila X2 (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
Slicer-configuratie
Kopieer deze waarden naar je slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Instelling | Waarde | Bereik |
|---|---|---|
| Mondstuktemperatuur | 223°C | 210-235°C |
| Bedtemperatuur | 50°C | 40-60°C |
| Eerste laag mondstuk | 228°C | +5°C above normal |
| Eerste laag bed | 55°C | +5°C above normal |
| Afdruksnelheid | 18 mm/s | 10-25 mm/s |
| Eerste laag snelheid | 15 mm/s | 25-50% of normal |
| Muursnelheid | 14 mm/s | 70-80% of normal |
| Reissnelheid | 38 mm/s | 120-150% of print speed |
| Laagdikte | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Muurantal | 3-4 | Perimeters/shells |
| Boven-/onderlagen | 5-6 | Solid layers |
| Koelventilator | 100% | From layer 2+ |
| Intrekngsafstand | 4-6 mm | Bowden |
| Intreksnelheid | 40 mm/s | Bowden |
Voordat je afdrukt
Afdrukprofielen kwaliteit
Three presets for common use cases with TPU 87A on the Voxelab Aquila X2.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 25 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 18 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 10 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Adhesie bed
TPU 87A hecht aan PEI-platen en glazen bedden. Dit is een hardere TPU-variant met betere hechting.
Temperatuurafstemmingsgids
Nozzle: 223°C
Range: 210-235°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Problemen oplossen TPU 87A op Voxelab Aquila X2
Pro tips voor TPU 87A
TPU 87A is stijver dan normale TPU maar flexibler dan PLA
Druk langzaam maar sneller dan normale TPU - 30-50 mm/s
Directe aandrijving wordt aanbevolen maar Bowden kan werken
Minimaliseer retractie maar niet zo extreem als normale TPU
Materiaal is ideaal voor functionele flexibele onderdelen
Ondersteuningsinstellingen
For prints requiring supports with TPU 87A, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Voxelab Aquila X2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
TPU 87A Properties
| Nozzle Range | 210-235°C |
| Bed Range | 40-60°C |
| Speed Range | 10-25 mm/s |
| Difficulty | advanced |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPU 87A in één oogopslag
Sterke punten
- Very soft and flexible — Shore 87A
- Ideal for gaskets, seals, soft grips
- Excellent shock absorption
- Stretches 500%+ before breaking
Zwakke punten
- Direct drive extruder required
- Extremely slow print speeds
- Very difficult to control retraction
- Prone to jamming in Bowden tubes
Wil je gepersonaliseerde AI-instellingen?
Beschrijf je exacte setup en wat je afdrukt. 3DSearch's AI-expert genereert in seconden aangepaste slicer-instellingen voor je Voxelab Aquila X2 met TPU 87A.
Probeer 3DSearch →Bronnen: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Waarden berekend op basis van filamentspecificaties en printerhard warelimiet.