PA6-CF Settings for Voxelab Aquila X2
Recommended slicer settings for printing PA6-CF on the Voxelab Aquila X2 (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 260°C | 255-280°C |
| 热床温度 | 93°C | 85-100°C |
| 首层喷嘴 | 260°C | At printer max |
| 首层热床 | 98°C | +5°C above normal |
| 打印速度 | 35 mm/s | 25-45 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 26 mm/s | 70-80% of normal |
| 空走速度 | 68 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 2-3 | Perimeters/shells |
| 顶层/底层 | 3-4 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 4-6 mm | Bowden |
| 回抽速度 | 40 mm/s | Bowden |
开始打印前
打印质量预设
Three presets for common use cases with PA6-CF on the Voxelab Aquila X2.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 45 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 35 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 25 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
PA6-CF 需要 Garolite (G10) 片或 PEI 配 Magigoo PA 粘合剂,80-100°C。裙边至关重要。碳纤维与普通 PA6 相比略微减少翘曲,但外罩仍然强制。从干燥盒打印。
温度调校指南
Nozzle: 260°C
Range: 255-280°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 93°C
Range: 85-100°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Voxelab Aquila X2 上打印 PA6-CF 的问题排查
PA6-CF 使用技巧
全金属热端和硬化钢喷嘴(0.5mm+)都是强制的
在 80°C 下干燥 16+ 小时并从活跃干燥干燥盒打印
PA6-CF 为结构应用提供出色的刚性重量比
彻底密封你的外罩;气流导致 PA6-CF 分层
支撑设置
For prints requiring supports with PA6-CF, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Voxelab Aquila X2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
PA6-CF Properties
| Nozzle Range | 255-280°C |
| Bed Range | 85-100°C |
| Speed Range | 25-45 mm/s |
| Difficulty | advanced |
| Drying | 85°C / 12h |
| Enclosure | Recommended |
PA6-CF 速览
优势
- Extremely stiff and strong
- Better dimensional stability than PA6
- Reduced moisture absorption vs plain PA6
- Professional matte finish
劣势
- Hardened steel nozzle mandatory
- Very hygroscopic — dry box printing essential
- Expensive (~$50-80/kg)
- Brittle compared to unreinforced PA6
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Voxelab Aquila X2 搭配 PA6-CF 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。