TPC Settings for Bambu Lab H2D Pro
Recommended slicer settings for printing TPC on the Bambu Lab H2D Pro (350 x 320 x 325 mm build volume, 1000 mm/s max speed, direct drive extruder).
Slicer Yapılandırması
Bu değerleri slicer'ına (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio) kopyala| Ayar | Değer | Aralık |
|---|---|---|
| Nozzle Sıcaklığı | 225°C | 210-240°C |
| Platform Sıcaklığı | 50°C | 40-60°C |
| İlk Katman Nozzle | 230°C | +5°C above normal |
| İlk Katman Platform | 55°C | +5°C above normal |
| Baskı Hızı | 23 mm/s | 15-30 mm/s |
| İlk Katman Hızı | 15 mm/s | 25-50% of normal |
| Duvar Hızı | 17 mm/s | 70-80% of normal |
| Hareket Hızı | 45 mm/s | 120-150% of print speed |
| Katman Yüksekliği | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Duvar Sayısı | 3-4 | Perimeters/shells |
| Üst/Alt Katmanlar | 5-6 | Solid layers |
| Soğutma Vantilatörü | 100% | From layer 2+ |
| Geri Çekilme Mesafesi | 0.8-1.2 mm | Direct drive |
| Geri Çekilme Hızı | 40 mm/s | Direct drive |
Yazdırmadan Önce
Baskı Kalitesi Profilleri
Three presets for common use cases with TPC on the Bambu Lab H2D Pro.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 30 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 23 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 15 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Platform Yapışması
TPC PEI levhalarına ve cam yatağa yapışır. Yapışma TPU'ya benzerdir.
Sıcaklık Ayarlama Rehberi
Nozzle: 225°C
Range: 210-240°C. Printer max: 350°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 120°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
TPC ile Bambu Lab H2D Pro üzerinde sorun giderme
TPC için Pro İpuçları
TPC termoplastik kopoliester - TPU'ya benzer esnek ancak biraz daha sert
Yavaş yazdır - 20-40 mm/s
Doğrudan Sürücü çok tavsiye edilir
Retraksiyonu en aza indir - 0.5-1mm yeterlidir
Malzeme esnek parçalar için idealdir
Destek Ayarları
For prints requiring supports with TPC, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Bambu Lab H2D Pro Specs
| Build Volume | 350 x 320 x 325 mm |
| Max Speed | 1000 mm/s |
| Max Nozzle Temp | 350°C |
| Max Bed Temp | 120°C |
| Extruder | Direct Drive |
TPC Properties
| Nozzle Range | 210-240°C |
| Bed Range | 40-60°C |
| Speed Range | 15-30 mm/s |
| Difficulty | intermediate |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPC Bir Bakışta
Güçlü Yönleri
- Flexible co-polyester — better chemical resistance than TPU
- Good UV resistance for outdoor flexible parts
- Better printability than TPE
- Good temperature resistance
Zayıf Yönleri
- Less flexible than TPU at same hardness
- More expensive than TPU
- Limited brand availability
- Fewer color options
Kişiselleştirilmiş yapay zeka ayarları ister misin?
Tam kurulumunu ve ne yazdırdığını açıkla. 3DSearch'ün yapay zeka uzmanı saniyeler içinde TPC ile Bambu Lab H2D Pro için özel slicer ayarları oluşturuyor.
3DSearch'ü dene →Kaynaklar: Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. Değerler filament belirtimleri ve yazıcı donanım sınırlarından hesaplanmıştır.