PC Settings for Snapmaker 2.0 A350T
Recommended slicer settings for printing PC on the Snapmaker 2.0 A350T (320 x 350 x 330 mm build volume, 200 mm/s max speed, direct drive extruder).
Uyumlu Değiladvanced
Uyumlu Değil
The max bed temperature of 80°C is below the recommended 100°C for PC. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 260-310°C |
| Printer Max Nozzle | 275°C |
| Filament Bed Requirement | 100-120°C |
| Printer Max Bed | 80°C |
Bunun yerine yapılması gerekenler
- Your printer's bed maxes out at 80°C, but PC needs at least 100°C for reliable adhesion.
- Try a compatible filament for your Snapmaker 2.0 A350T — PLA, PETG, and ABS are good options.
- If you need PC specifically, you'll need a printer with a hotend capable of 260°C+ nozzle and 100°C+ heated bed.
PC Requirements
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 80°C / 10h |
Snapmaker 2.0 A350T Specs
| Build Volume | 320 x 350 x 330 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 275°C |
| Max Bed Temp | 80°C |
| Extruder | Direct Drive |
PC Bir Bakışta
Güçlü Yönleri
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
Zayıf Yönleri
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
Kişiselleştirilmiş yapay zeka ayarları ister misin?
Tam kurulumunu ve ne yazdırdığını açıkla. 3DSearch'ün yapay zeka uzmanı saniyeler içinde PC ile Snapmaker 2.0 A350T için özel slicer ayarları oluşturuyor.
3DSearch'ü dene →Kaynaklar: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Değerler filament belirtimleri ve yazıcı donanım sınırlarından hesaplanmıştır.