POM Settings for Snapmaker 2.0 A350T
Recommended slicer settings for printing POM on the Snapmaker 2.0 A350T (320 x 350 x 330 mm build volume, 200 mm/s max speed, direct drive extruder).
Not Compatibleadvanced
Not Compatible
The max bed temperature of 80°C is below the recommended 100°C for POM. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 200-220°C |
| Printer Max Nozzle | 275°C |
| Filament Bed Requirement | 100-130°C |
| Printer Max Bed | 80°C |
What to do instead
- Your printer's bed maxes out at 80°C, but POM needs at least 100°C for reliable adhesion.
- Try a compatible filament for your Snapmaker 2.0 A350T — PLA, PETG, and ABS are good options.
- If you need POM specifically, you'll need a printer with a hotend capable of 200°C+ nozzle and 100°C+ heated bed.
POM Requirements
POM Properties
| Nozzle Range | 200-220°C |
| Bed Range | 100-130°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Not needed |
| Drying | 60°C / 6h |
Snapmaker 2.0 A350T Specs
| Build Volume | 320 x 350 x 330 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 275°C |
| Max Bed Temp | 80°C |
| Extruder | Direct Drive |
POM at a Glance
Strengths
- Lowest friction of any printable plastic
- Replaces machined Delrin/Acetal parts
- Self-lubricating — ideal for gears and bearings
- Excellent fatigue resistance
Weaknesses
- Extremely difficult bed adhesion
- Requires POM-specific build surface or tape
- Emits formaldehyde fumes — ventilation required
- Very few printers handle it well
Want personalized AI settings?
Describe your exact setup and what you are printing. 3DSearch's AI expert generates custom slicer settings for your Snapmaker 2.0 A350T with POM in seconds.
Try 3DSearch →Sources: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Values calculated from filament specifications and printer hardware limits.