ABS Settings for Creality CR-10 Smart Pro
Recommended slicer settings for printing ABS on the Creality CR-10 Smart Pro (300 x 300 x 400 mm build volume, 100 mm/s max speed, direct drive extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 245°C | 230-260°C |
| 热床温度 | 100°C | 95-110°C |
| 首层喷嘴 | 250°C | +5°C above normal |
| 首层热床 | 100°C | At printer max |
| 打印速度 | 50 mm/s | 30-70 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 38 mm/s | 70-80% of normal |
| 空走速度 | 100 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 2-3 | Perimeters/shells |
| 顶层/底层 | 3-4 | Solid layers |
| 散热风扇 | 0-10% | From layer 2+ |
| 回抽距离 | 0.8-1.2 mm | Direct drive |
| 回抽速度 | 40 mm/s | Direct drive |
开始打印前
打印质量预设
Three presets for common use cases with ABS on the Creality CR-10 Smart Pro.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 70 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 50 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 30 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
ABS 需要高热床温度(95-110°C)。使用 PEI 片或涂抹 ABS 浆液(丙酮溶解的 ABS 废料)以获得出色粘合。强烈建议中型和大型零件使用裙边。Kapton 胶带是另一个经典选择。
温度调校指南
Nozzle: 245°C
Range: 230-260°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 95-110°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Creality CR-10 Smart Pro 上打印 ABS 的问题排查
ABS 使用技巧
外罩对可靠的 ABS 打印至关重要 -- 即使轻微气流也会导致翘曲
将热床预热到全温并在打印前浸泡 5-10 分钟
ABS 浆液(丙酮溶解的 ABS)是 ABS 最佳粘合方法
你可以用丙酮光滑 ABS 打印件以获得有光泽的专业效果
如果需要抗紫外线,考虑用 ASA 替代 -- ABS 在阳光下会变黄
支撑设置
For prints requiring supports with ABS, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality CR-10 Smart Pro Specs
| Build Volume | 300 x 300 x 400 mm |
| Max Speed | 100 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
ABS Properties
| Nozzle Range | 230-260°C |
| Bed Range | 95-110°C |
| Speed Range | 30-70 mm/s |
| Difficulty | intermediate |
| Drying | 77°C / 4h |
| Enclosure | Recommended |
ABS 速览
优势
- Good heat resistance (softens ~105C)
- Good impact resistance
- Can be acetone-smoothed for glossy finish
- Widely used classic engineering plastic
- Good for functional indoor parts
劣势
- Warps aggressively without enclosure
- Emits styrene fumes (ventilation needed)
- Poor UV resistance (yellows in sunlight)
- Requires high bed temperature
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Creality CR-10 Smart Pro 搭配 ABS 生成定制切片参数。
试用 3DSearch →来源： Based on Creality support documentation, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。