TPE Settings for Creality CR-10 Smart Pro
Recommended slicer settings for printing TPE on the Creality CR-10 Smart Pro (300 x 300 x 400 mm build volume, 100 mm/s max speed, direct drive extruder).
Slicer-configuratie
Kopieer deze waarden naar je slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Instelling | Waarde | Bereik |
|---|---|---|
| Mondstuktemperatuur | 215°C | 200-230°C |
| Bedtemperatuur | 40°C | 30-50°C |
| Eerste laag mondstuk | 220°C | +5°C above normal |
| Eerste laag bed | 45°C | +5°C above normal |
| Afdruksnelheid | 18 mm/s | 10-25 mm/s |
| Eerste laag snelheid | 15 mm/s | 25-50% of normal |
| Muursnelheid | 14 mm/s | 70-80% of normal |
| Reissnelheid | 38 mm/s | 120-150% of print speed |
| Laagdikte | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Muurantal | 3-4 | Perimeters/shells |
| Boven-/onderlagen | 5-6 | Solid layers |
| Koelventilator | 100% | From layer 2+ |
| Intrekngsafstand | 0.8-1.2 mm | Direct drive |
| Intreksnelheid | 40 mm/s | Direct drive |
Voordat je afdrukt
Afdrukprofielen kwaliteit
Three presets for common use cases with TPE on the Creality CR-10 Smart Pro.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 25 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 18 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 10 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Adhesie bed
TPE hecht aan PEI-platen en glazen bedden. Hechting is vergelijkbaar met TPU.
Temperatuurafstemmingsgids
Nozzle: 215°C
Range: 200-230°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 40°C
Range: 30-50°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Problemen oplossen TPE op Creality CR-10 Smart Pro
Pro tips voor TPE
TPE is thermoplastisch elastomeer - zeer flexibel
Druk langzaam - 15-30 mm/s
Directe aandrijving is nodig voor betrouwbare afdrukken
Minimaliseer retractie sterk - het veroorzaakt jamming
Materiaal is ideaal voor flexibele onderdelen zoals beschermhoezen
Ondersteuningsinstellingen
For prints requiring supports with TPE, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality CR-10 Smart Pro Specs
| Build Volume | 300 x 300 x 400 mm |
| Max Speed | 100 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
TPE Properties
| Nozzle Range | 200-230°C |
| Bed Range | 30-50°C |
| Speed Range | 10-25 mm/s |
| Difficulty | advanced |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPE in één oogopslag
Sterke punten
- Softer than TPU — very rubber-like
- Excellent elasticity and memory
- Good for very flexible parts
- Chemical resistant
Zwakke punten
- Extremely difficult to print
- Direct drive required — impossible on Bowden
- Very slow speeds only
- Poor detail resolution due to softness
Wil je gepersonaliseerde AI-instellingen?
Beschrijf je exacte setup en wat je afdrukt. 3DSearch's AI-expert genereert in seconden aangepaste slicer-instellingen voor je Creality CR-10 Smart Pro met TPE.
Probeer 3DSearch →Bronnen: Based on Creality support documentation, community testing data, manufacturer recommended ranges. Waarden berekend op basis van filamentspecificaties en printerhard warelimiet.