Glass-fiber PETG Settings for Markforged Mark Two
Recommended slicer settings for printing Glass-fiber PETG on the Markforged Mark Two (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
互換性なしintermediate
互換性なし
The max bed temperature of 0°C is below the recommended 80°C for Glass-fiber PETG. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 235-260°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 80-95°C |
| Printer Max Bed | N/A |
代わりにすること
- Your printer's bed maxes out at 0°C, but Glass-fiber PETG needs at least 80°C for reliable adhesion.
- Try a compatible filament for your Markforged Mark Two — PLA, PETG, and ABS are good options.
- If you need Glass-fiber PETG specifically, you'll need a printer with a hotend capable of 235°C+ nozzle.
Glass-fiber PETG Requirements
Glass-fiber PETG Properties
| Nozzle Range | 235-260°C |
| Bed Range | 80-95°C |
| Speed Range | 30-50 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | 65°C / 7h |
Markforged Mark Two Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Glass-fiber PETG一目でわかる
強み
- Much stiffer than standard PETG
- Better heat resistance than plain PETG
- Good dimensional stability
- Less expensive than carbon fiber composites
弱点
- Hardened steel nozzle required
- Increased brittleness vs standard PETG
- Use 0.5mm+ nozzle to prevent clogging
- Rougher surface finish
パーソナライズされたAI設定が欲しいですか？
あなたの正確なセットアップと印刷内容を説明してください。3DSearchのAIエキスパートが数秒であなたのMarkforged Mark Two用のGlass-fiber PETGカスタムスライサー設定を生成します。
3DSearchを試す →ソース: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. フィラメント仕様とプリンターハードウェア制限から計算。