PP Settings for Monoprice MP Voxel
Recommended slicer settings for printing PP on the Monoprice MP Voxel (150 x 150 x 150 mm build volume, 100 mm/s max speed, direct drive extruder).
Non compatibleadvanced
Non compatible
The max bed temperature of 60°C is below the recommended 85°C for PP. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 220-250°C |
| Printer Max Nozzle | 260°C |
| Filament Bed Requirement | 85-100°C |
| Printer Max Bed | 60°C |
Que faire à la place
- Your printer's bed maxes out at 60°C, but PP needs at least 85°C for reliable adhesion.
- Try a compatible filament for your Monoprice MP Voxel — PLA, PETG, and ABS are good options.
- If you need PP specifically, you'll need a printer with a hotend capable of 220°C+ nozzle.
PP Requirements
PP Properties
| Nozzle Range | 220-250°C |
| Bed Range | 85-100°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Not needed |
| Drying | 55°C / 6h |
Monoprice MP Voxel Specs
| Build Volume | 150 x 150 x 150 mm |
| Max Speed | 100 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 60°C |
| Extruder | Direct Drive |
PP en un coup d'œil
Points forts
- Chemically inert — resists most solvents and acids
- Flexible living hinges
- Fatigue resistant — can be bent repeatedly
- Food-safe and lightweight
Points faibles
- Terrible bed adhesion — needs PP tape or packing tape
- Warps severely
- Very difficult to bond or glue
- Limited color availability
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Monoprice MP Voxel avec PP en quelques secondes.
Essayer 3DSearch →Sources : Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.