Bronze-fill PLA Settings for Markforged Mark Two
Recommended slicer settings for printing Bronze-fill PLA on the Markforged Mark Two (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
Non compatibleintermediate
Non compatible
The max bed temperature of 0°C is below the recommended 50°C for Bronze-fill PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 195-220°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 50-60°C |
| Printer Max Bed | N/A |
Que faire à la place
- Your printer's bed maxes out at 0°C, but Bronze-fill PLA needs at least 50°C for reliable adhesion.
- Try a compatible filament for your Markforged Mark Two — PLA, PETG, and ABS are good options.
- If you need Bronze-fill PLA specifically, you'll need a printer with a hotend capable of 195°C+ nozzle.
Bronze-fill PLA Requirements
Bronze-fill PLA Properties
| Nozzle Range | 195-220°C |
| Bed Range | 50-60°C |
| Speed Range | 20-40 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Mark Two Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Bronze-fill PLA en un coup d'œil
Points forts
- Contains real bronze particles
- Can be polished and patinated for antique look
- Significantly heavier than standard PLA
- Excellent for statues and decorative art
Points faibles
- Hardened nozzle recommended
- Slow print speeds required
- Expensive
- Brittle — not for functional parts
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Markforged Mark Two avec Bronze-fill PLA en quelques secondes.
Essayer 3DSearch →Sources : Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.