Wood PLA Settings for Voxelab Aquila X2
Recommended slicer settings for printing Wood PLA on the Voxelab Aquila X2 (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
Configuración del Slicer
Copia estos valores en tu slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Configuración | Valor | Rango |
|---|---|---|
| Temperatura de Boquilla | 195°C | 180-210°C |
| Temperatura de Cama | 50°C | 40-60°C |
| Primera Capa de Boquilla | 200°C | +5°C above normal |
| Primera Capa de Cama | 55°C | +5°C above normal |
| Velocidad de Impresión | 40 mm/s | 30-50 mm/s |
| Velocidad de Primera Capa | 15 mm/s | 25-50% of normal |
| Velocidad de Paredes | 30 mm/s | 70-80% of normal |
| Velocidad de Viaje | 75 mm/s | 120-150% of print speed |
| Altura de Capa | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Número de Paredes | 2-3 | Perimeters/shells |
| Capas Superiores/Inferiores | 3-4 | Solid layers |
| Ventilador de Enfriamiento | 100% | From layer 2+ |
| Distancia de Retracción | 4-6 mm | Bowden |
| Velocidad de Retracción | 40 mm/s | Bowden |
Antes de Imprimir
Perfiles de Calidad de Impresión
Three presets for common use cases with Wood PLA on the Voxelab Aquila X2.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 50 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 40 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 30 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Adhesión de Cama
Wood PLA se adhiere como PLA normal. Las fibras de madera no tienen impacto negativo en la adhesión.
Guía de Sintonización de Temperatura
Nozzle: 195°C
Range: 180-210°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Solución de problemas Wood PLA en Voxelab Aquila X2
Consejos Profesionales para Wood PLA
Wood PLA tiene apariencia de madera realista - no se necesita post-procesamiento
Imprime a temperaturas similares a PLA normal (200-220°C)
Aumenta la tasa de flujo 10% por las fibras de madera
La superficie puede ser lijada o teñida para apariencia más realista
El material es ideal para piezas decorativas con apariencia de madera
Configuración de Soportes
For prints requiring supports with Wood PLA, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Voxelab Aquila X2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
Wood PLA Properties
| Nozzle Range | 180-210°C |
| Bed Range | 40-60°C |
| Speed Range | 30-50 mm/s |
| Difficulty | intermediate |
| Drying | Not required |
| Enclosure | Not needed |
Wood PLA de un Vistazo
Fortalezas
- Real wood-like appearance and feel
- Can be sanded, stained, and finished like real wood
- Temperature controls color (lower=lighter, higher=darker)
- Does not require hardened nozzle
- Great for decorative and artistic prints
Debilidades
- Prone to clogging (use 0.6mm nozzle recommended)
- Do not leave filament sitting hot in nozzle (chars)
- Inconsistent color (but adds to wood look)
- Slower print speeds needed
- Not for structural or functional parts
¿Quieres configuraciones de IA personalizadas?
Describe tu configuración exacta y qué estás imprimiendo. El experto en IA de 3DSearch genera configuraciones de slicer personalizadas para tu Voxelab Aquila X2 con Wood PLA en segundos.
Prueba 3DSearch →Fuentes: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valores calculados a partir de especificaciones de filamento y límites de hardware de impresora.