Recycled PETG Settings for Monoprice MP Select Mini
Recommended slicer settings for printing Recycled PETG on the Monoprice MP Select Mini (120 x 120 x 120 mm build volume, 55 mm/s max speed, Bowden extruder).
Nicht kompatibelbeginner
Nicht kompatibel
The max bed temperature of 60°C is below the recommended 75°C for Recycled PETG. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 225-250°C |
| Printer Max Nozzle | 260°C |
| Filament Bed Requirement | 75-90°C |
| Printer Max Bed | 60°C |
Was du stattdessen tun kannst
- Your printer's bed maxes out at 60°C, but Recycled PETG needs at least 75°C for reliable adhesion.
- Try a compatible filament for your Monoprice MP Select Mini — PLA, PETG, and ABS are good options.
- If you need Recycled PETG specifically, you'll need a printer with a hotend capable of 225°C+ nozzle.
Recycled PETG Requirements
Recycled PETG Properties
| Nozzle Range | 225-250°C |
| Bed Range | 75-90°C |
| Speed Range | 30-50 mm/s |
| Difficulty | beginner |
| Enclosure | Not needed |
| Drying | 65°C / 7h |
Monoprice MP Select Mini Specs
| Build Volume | 120 x 120 x 120 mm |
| Max Speed | 55 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 60°C |
| Extruder | Bowden |
Recycled PETG auf einen Blick
Stärken
- Eco-friendly recycled material
- Similar properties to virgin PETG
- Good impact and chemical resistance
- Reduces plastic waste
Schwächen
- Color consistency may vary
- Slightly more stringing than virgin PETG
- Limited color options
Möchtest du personalisierte KI-Einstellungen?
Beschreibe dein genaues Setup und was du druckst. 3DSearch's KI-Experte erzeugt in Sekunden individuelle Slicer-Einstellungen für deinen Monoprice MP Select Mini mit Recycled PETG.
3DSearch ausprobieren →Quellen: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Werte berechnet aus Filament-Spezifikationen und Drucker-Hardware-Limits.