ABS-CF Settings for Anycubic Kobra 2
Recommended slicer settings for printing ABS-CF on the Anycubic Kobra 2 (220 x 220 x 250 mm build volume, 300 mm/s max speed, direct drive extruder).
إعدادات Slicer
انسخ هذه القيم إلى Slicer الخاص بك (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| الإعداد | القيمة | النطاق |
|---|---|---|
| درجة حرارة الفوهة | 250°C | 240-260°C |
| درجة حرارة المنصة | 100°C | 90-110°C |
| الفوهة للطبقة الأولى | 255°C | +5°C above normal |
| المنصة للطبقة الأولى | 105°C | +5°C above normal |
| سرعة الطباعة | 40 mm/s | 30-50 mm/s |
| سرعة الطبقة الأولى | 15 mm/s | 25-50% of normal |
| سرعة الجدران | 30 mm/s | 70-80% of normal |
| سرعة الانتقال | 75 mm/s | 120-150% of print speed |
| ارتفاع الطبقة | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| عدد الجدران | 2-3 | Perimeters/shells |
| الطبقات العلوية/السفلية | 3-4 | Solid layers |
| مروحة التبريد | 0-10% | From layer 2+ |
| مسافة السحب | 0.8-1.2 mm | Direct drive |
| سرعة السحب | 40 mm/s | Direct drive |
قبل أن تطبع
ملفات تعريف جودة الطباعة
Three presets for common use cases with ABS-CF on the Anycubic Kobra 2.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 50 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 40 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 30 mm/s | 20-30% | Miniatures, display pieces, fine detail |
التصاق بالمنصة
ABS-CF uses the same adhesion methods as standard ABS. Use a PEI sheet at 90-110°C with ABS slurry or glue stick. A brim is strongly recommended. The carbon fibers reduce warping compared to plain ABS, but an enclosure is still essential.
دليل ضبط درجة الحرارة
Nozzle: 250°C
Range: 240-260°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 90-110°C. Printer max: 110°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
استكشاف أخطاء ABS-CF على Anycubic Kobra 2
نصائح احترافية لـ ABS-CF
A hardened steel nozzle (0.5mm+) is mandatory for carbon fiber filaments
An enclosure is non-negotiable -- ABS-CF warps like ABS but the fibers help with dimensional stability
Dry filament at 77°C for 6+ hours before printing; moisture causes bubbling and weak layers
ABS-CF produces less warping than plain ABS due to the carbon fibers reducing shrinkage
For outdoor applications, consider ASA-based composites instead -- ABS-CF yellows in sunlight
إعدادات الدعائم
For prints requiring supports with ABS-CF, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Anycubic Kobra 2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 300 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 110°C |
| Extruder | Direct Drive |
ABS-CF Properties
| Nozzle Range | 240-260°C |
| Bed Range | 90-110°C |
| Speed Range | 30-50 mm/s |
| Difficulty | advanced |
| Drying | 77°C / 6h |
| Enclosure | Recommended |
ABS-CF في لمحة
نقاط القوة
- Much stiffer than standard ABS with less warping
- Good heat resistance (similar to ABS, HDT ~100C)
- Professional matte black finish
- Better dimensional accuracy than plain ABS
- Ideal for functional parts needing rigidity and heat resistance
نقاط الضعف
- Requires hardened steel nozzle (carbon fibers destroy brass)
- Enclosure required (emits fumes like ABS)
- More brittle than standard ABS (reduced impact resistance)
- Use 0.5mm+ nozzle to avoid clogging from fibers
- Poor UV resistance (same as ABS, consider ASA-CF for outdoor use)
تريد إعدادات AI مخصصة؟
صِف إعدادك الدقيق وما تطبعه. يُنشئ خبير AI في 3DSearch إعدادات تقطيع مخصصة لطابعتك Anycubic Kobra 2 مع ABS-CF خلال ثوانٍ.
جرّب 3DSearch →المصادر: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. تم حساب القيم من مواصفات الفيلامنت وحدود عتاد الطابعة.