PLA Settings for Anycubic Kobra 2
Recommended slicer settings for printing PLA on the Anycubic Kobra 2 (220 x 220 x 250 mm build volume, 300 mm/s max speed, direct drive extruder).
Slicer-Konfiguration
Kopiere diese Werte in deinen Slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Einstellung | Wert | Bereich |
|---|---|---|
| Düsentemperatur | 205°C | 190-220°C |
| Heizbetttemperatur | 55°C | 50-60°C |
| Erste Schicht Düse | 210°C | +5°C above normal |
| Erste Schicht Heizbett | 60°C | +5°C above normal |
| Druckgeschwindigkeit | 200 mm/s | 100-300 mm/s |
| Erste Schicht Geschwindigkeit | 50 mm/s | 25-50% of normal |
| Wandgeschwindigkeit | 150 mm/s | 70-80% of normal |
| Verfahrgeschwindigkeit | 300 mm/s | 120-150% of print speed |
| Schichthöhe | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Wandanzahl | 2-3 | Perimeters/shells |
| Oben/Unten Schichten | 3-4 | Solid layers |
| Kühlventilator | 100% | From layer 2+ |
| Rückzugsdistanz | 0.8-1.2 mm | Direct drive |
| Rückzugsgeschwindigkeit | 40 mm/s | Direct drive |
Vor dem Drucken
Druckqualität Profile
Three presets for common use cases with PLA on the Anycubic Kobra 2.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 300 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 200 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 100 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Haftung des Heizbetts
PLA haftet gut auf PEI-Blechen (glatt oder strukturiert) ohne Klebstoff. Wenn du ein Glasbett verwendest, trage eine dünne Schicht Klebestift oder Haarspray auf. Reinige das Bett vor jedem Druck mit Isopropylalkohol (IPA) für konstante Haftung.
Temperatur-Abstimmungsanleitung
Nozzle: 205°C
Range: 190-220°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 55°C
Range: 50-60°C. Printer max: 110°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Fehlerbehebung PLA auf Anycubic Kobra 2
Pro-Tipps für PLA
Drucke einen Temperaturturm, um die optimale Temperatur für deine spezifische PLA-Marke zu finden
Lagere Filament in einem luftdichten Behälter mit Trockenmittel, wenn du es nicht verwendest
Reinige das Bett vor jedem Druck mit IPA für konstante Haftung
Verwende ab Schicht 2 an 100% Kühlventilator für beste Überhänge und Brücken
PLA ist ideal zum Prototyping, aber lasse Drucke nicht in heißen Autos oder direktem Sonnenlicht liegen
Support-Einstellungen
For prints requiring supports with PLA, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Anycubic Kobra 2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 300 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 110°C |
| Extruder | Direct Drive |
PLA Properties
| Nozzle Range | 190-220°C |
| Bed Range | 50-60°C |
| Speed Range | 40-60 mm/s |
| Difficulty | beginner |
| Drying | Not required |
| Enclosure | Not needed |
PLA auf einen Blick
Stärken
- Easiest filament to print with
- No heated bed strictly required (helps though)
- Wide range of colors available
- Low warping
- Biodegradable (derived from corn starch)
- Good tensile strength (47-60 MPa)
Schwächen
- Low heat resistance (softens at 55-60C)
- Brittle under impact
- Poor UV/outdoor resistance
- Not food-safe without coating
Möchtest du personalisierte KI-Einstellungen?
Beschreibe dein genaues Setup und was du druckst. 3DSearch's KI-Experte erzeugt in Sekunden individuelle Slicer-Einstellungen für deinen Anycubic Kobra 2 mit PLA.
3DSearch ausprobieren →Quellen: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Werte berechnet aus Filament-Spezifikationen und Drucker-Hardware-Limits.