HIPS Settings for Snapmaker 2.0 A350T
Recommended slicer settings for printing HIPS on the Snapmaker 2.0 A350T (320 x 350 x 330 mm build volume, 200 mm/s max speed, direct drive extruder).
不兼容intermediate
不兼容
The max bed temperature of 80°C is below the recommended 90°C for HIPS. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 230-245°C |
| Printer Max Nozzle | 275°C |
| Filament Bed Requirement | 90-110°C |
| Printer Max Bed | 80°C |
该怎么办
- Your printer's bed maxes out at 80°C, but HIPS needs at least 90°C for reliable adhesion.
- Try a compatible filament for your Snapmaker 2.0 A350T — PLA, PETG, and ABS are good options.
- If you need HIPS specifically, you'll need a printer with a hotend capable of 230°C+ nozzle.
HIPS Requirements
HIPS Properties
| Nozzle Range | 230-245°C |
| Bed Range | 90-110°C |
| Speed Range | 40-50 mm/s |
| Difficulty | intermediate |
| Enclosure | Required |
| Drying | Not required |
Snapmaker 2.0 A350T Specs
| Build Volume | 320 x 350 x 330 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 275°C |
| Max Bed Temp | 80°C |
| Extruder | Direct Drive |
HIPS 速览
优势
- Dissolves in D-Limonene (support material for ABS)
- Much cheaper than PVA ($20-25/kg)
- Low moisture sensitivity
- Can be used as standalone lightweight material
- Easy to paint and post-process
劣势
- Requires D-Limonene solvent
- Only pairs well with ABS
- Needs enclosure (same as ABS)
- Less common than PVA for support use
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Snapmaker 2.0 A350T 搭配 HIPS 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。