TPC Settings for Monoprice MP Select Mini
Recommended slicer settings for printing TPC on the Monoprice MP Select Mini (120 x 120 x 120 mm build volume, 55 mm/s max speed, Bowden extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 225°C | 210-240°C |
| 热床温度 | 50°C | 40-60°C |
| 首层喷嘴 | 230°C | +5°C above normal |
| 首层热床 | 55°C | +5°C above normal |
| 打印速度 | 23 mm/s | 15-30 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 17 mm/s | 70-80% of normal |
| 空走速度 | 45 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 3-4 | Perimeters/shells |
| 顶层/底层 | 5-6 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 4-6 mm | Bowden |
| 回抽速度 | 40 mm/s | Bowden |
开始打印前
打印质量预设
Three presets for common use cases with TPC on the Monoprice MP Select Mini.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 30 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 23 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 15 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
TPC(热塑性共聚酯弹性体)粘合良好到 PEI 片。与 TPU 相似粘合 -- 柔性耗材自然抓住热床。在玻璃热床上使用胶棒。
温度调校指南
Nozzle: 225°C
Range: 210-240°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 60°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Monoprice MP Select Mini 上打印 TPC 的问题排查
TPC 使用技巧
TPC 是半柔性工程材料,具有良好的化学耐性
像 TPU 一样打印但在稍微高一点的温度(220-240°C)
在 60°C 下干燥 6-8 小时后打印;TPC 对水分敏感
TPC 是刚性 PETG 和完全柔性 TPU 之间的好中间地带
支撑设置
For prints requiring supports with TPC, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Monoprice MP Select Mini Specs
| Build Volume | 120 x 120 x 120 mm |
| Max Speed | 55 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 60°C |
| Extruder | Bowden |
TPC Properties
| Nozzle Range | 210-240°C |
| Bed Range | 40-60°C |
| Speed Range | 15-30 mm/s |
| Difficulty | intermediate |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPC 速览
优势
- Flexible co-polyester — better chemical resistance than TPU
- Good UV resistance for outdoor flexible parts
- Better printability than TPE
- Good temperature resistance
劣势
- Less flexible than TPU at same hardness
- More expensive than TPU
- Limited brand availability
- Fewer color options
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Monoprice MP Select Mini 搭配 TPC 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。