ABS-CF Settings for Markforged FX20
Recommended slicer settings for printing ABS-CF on the Markforged FX20 (525 x 400 x 400 mm build volume, 250 mm/s max speed, direct drive extruder).
不兼容advanced
不兼容
The max bed temperature of 0°C is below the recommended 90°C for ABS-CF. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 240-260°C |
| Printer Max Nozzle | 385°C |
| Filament Bed Requirement | 90-110°C |
| Printer Max Bed | N/A |
该怎么办
- Your printer's bed maxes out at 0°C, but ABS-CF needs at least 90°C for reliable adhesion.
- Try a compatible filament for your Markforged FX20 — PLA, PETG, and ABS are good options.
- If you need ABS-CF specifically, you'll need a printer with a hotend capable of 240°C+ nozzle.
ABS-CF Requirements
ABS-CF Properties
| Nozzle Range | 240-260°C |
| Bed Range | 90-110°C |
| Speed Range | 30-50 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 77°C / 6h |
Markforged FX20 Specs
| Build Volume | 525 x 400 x 400 mm |
| Max Speed | 250 mm/s |
| Max Nozzle Temp | 385°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
ABS-CF 速览
优势
- Much stiffer than standard ABS with less warping
- Good heat resistance (similar to ABS, HDT ~100C)
- Professional matte black finish
- Better dimensional accuracy than plain ABS
- Ideal for functional parts needing rigidity and heat resistance
劣势
- Requires hardened steel nozzle (carbon fibers destroy brass)
- Enclosure required (emits fumes like ABS)
- More brittle than standard ABS (reduced impact resistance)
- Use 0.5mm+ nozzle to avoid clogging from fibers
- Poor UV resistance (same as ABS, consider ASA-CF for outdoor use)
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Markforged FX20 搭配 ABS-CF 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。