PA12-CF Settings for Markforged FX20
Recommended slicer settings for printing PA12-CF on the Markforged FX20 (525 x 400 x 400 mm build volume, 250 mm/s max speed, direct drive extruder).
不兼容advanced
不兼容
The max bed temperature of 0°C is below the recommended 80°C for PA12-CF. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 260-280°C |
| Printer Max Nozzle | 385°C |
| Filament Bed Requirement | 80-100°C |
| Printer Max Bed | N/A |
该怎么办
- Your printer's bed maxes out at 0°C, but PA12-CF needs at least 80°C for reliable adhesion.
- Try a compatible filament for your Markforged FX20 — PLA, PETG, and ABS are good options.
- If you need PA12-CF specifically, you'll need a printer with a hotend capable of 260°C+ nozzle.
PA12-CF Requirements
PA12-CF Properties
| Nozzle Range | 260-280°C |
| Bed Range | 80-100°C |
| Speed Range | 25-45 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 80°C / 12h |
Markforged FX20 Specs
| Build Volume | 525 x 400 x 400 mm |
| Max Speed | 250 mm/s |
| Max Nozzle Temp | 385°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
PA12-CF 速览
优势
- Exceptional stiffness-to-weight ratio
- Excellent heat resistance (HDT ~140C under load)
- Lower moisture absorption than PA6-CF
- Professional matte finish with dimensional stability
- Ideal for high-performance jigs, drone frames, and tooling
劣势
- Requires hardened steel nozzle (mandatory)
- Requires all-metal hotend for 260-280C range
- Must be dried extensively and printed from dry box
- Enclosure required to prevent warping and delamination
- Expensive (~$50-80/kg) and limited color options
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Markforged FX20 搭配 PA12-CF 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。