TPU 87A Settings for Bambu Lab A1 Combo
Recommended slicer settings for printing TPU 87A on the Bambu Lab A1 Combo (256 x 256 x 256 mm build volume, 500 mm/s max speed, direct drive extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 223°C | 210-235°C |
| 热床温度 | 50°C | 40-60°C |
| 首层喷嘴 | 228°C | +5°C above normal |
| 首层热床 | 55°C | +5°C above normal |
| 打印速度 | 18 mm/s | 10-25 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 14 mm/s | 70-80% of normal |
| 空走速度 | 38 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 3-4 | Perimeters/shells |
| 顶层/底层 | 5-6 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 0.8-1.2 mm | Direct drive |
| 回抽速度 | 40 mm/s | Direct drive |
开始打印前
打印质量预设
Three presets for common use cases with TPU 87A on the Bambu Lab A1 Combo.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 25 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 18 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 10 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
TPU 87A(Shore 87A,非常软)粘合良好到 PEI 片和美纹纸。极度灵活性使热床移除容易。第一层缓慢速度对一致粘合至关重要。
温度调校指南
Nozzle: 223°C
Range: 210-235°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Bambu Lab A1 Combo 上打印 TPU 87A 的问题排查
TPU 87A 使用技巧
Shore 87A 非常软且难以打印 -- 仅用直接驱动挤出机尝试
打印极度缓慢:15-25 mm/s;即使经验用户也难以超过 30 mm/s
几乎无回抽(0-0.3mm) -- 材料对常规回抽太软
结果值得:87A 生产具有极好弹性的橡胶样零件
支撑设置
For prints requiring supports with TPU 87A, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Bambu Lab A1 Combo Specs
| Build Volume | 256 x 256 x 256 mm |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
TPU 87A Properties
| Nozzle Range | 210-235°C |
| Bed Range | 40-60°C |
| Speed Range | 10-25 mm/s |
| Difficulty | advanced |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPU 87A 速览
优势
- Very soft and flexible — Shore 87A
- Ideal for gaskets, seals, soft grips
- Excellent shock absorption
- Stretches 500%+ before breaking
劣势
- Direct drive extruder required
- Extremely slow print speeds
- Very difficult to control retraction
- Prone to jamming in Bowden tubes
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Bambu Lab A1 Combo 搭配 TPU 87A 生成定制切片参数。
试用 3DSearch →来源： Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。