PP Settings for Creality Ender 3 S1
Recommended slicer settings for printing PP on the Creality Ender 3 S1 (220 x 220 x 270 mm build volume, 150 mm/s max speed, direct drive extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 235°C | 220-250°C |
| 热床温度 | 93°C | 85-100°C |
| 首层喷嘴 | 240°C | +5°C above normal |
| 首层热床 | 98°C | +5°C above normal |
| 打印速度 | 30 mm/s | 20-40 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 23 mm/s | 70-80% of normal |
| 空走速度 | 60 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 2-3 | Perimeters/shells |
| 顶层/底层 | 3-4 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 0.8-1.2 mm | Direct drive |
| 回抽速度 | 40 mm/s | Direct drive |
开始打印前
打印质量预设
Three presets for common use cases with PP on the Creality Ender 3 S1.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 40 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 30 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 20 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
PP(聚丙烯)不粘合到标准热床表面。你必须使用 PP 包装胶带表面或专用 PP 热板。标准 PEI、玻璃和美纹纸不起作用。覆盖整个第一层的裙边至关重要。PP 显著收缩,即使设置恰当也预计一些翘曲。
温度调校指南
Nozzle: 235°C
Range: 220-250°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 93°C
Range: 85-100°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Creality Ender 3 S1 上打印 PP 的问题排查
PP 使用技巧
PP 需要聚丙烯包装胶带表面或专用 PP 热板 -- 标准表面不起作用
即使恰当设置也预计显著翘曲;保持零件小或使用调适收缩的生活铰链设计
PP 在化学上抗性、柔性和食品安全 -- 适合容器和铰链
风扇 0-10%;PP 需要保持温暖以获得适当层粘合
支撑设置
For prints requiring supports with PP, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality Ender 3 S1 Specs
| Build Volume | 220 x 220 x 270 mm |
| Max Speed | 150 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
PP Properties
| Nozzle Range | 220-250°C |
| Bed Range | 85-100°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Drying | 55°C / 6h |
| Enclosure | Not needed |
PP 速览
优势
- Chemically inert — resists most solvents and acids
- Flexible living hinges
- Fatigue resistant — can be bent repeatedly
- Food-safe and lightweight
劣势
- Terrible bed adhesion — needs PP tape or packing tape
- Warps severely
- Very difficult to bond or glue
- Limited color availability
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Creality Ender 3 S1 搭配 PP 生成定制切片参数。
试用 3DSearch →来源： Based on Creality support documentation, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。