PEEK Settings for Creality Ender 3 S1
Recommended slicer settings for printing PEEK on the Creality Ender 3 S1 (220 x 220 x 270 mm build volume, 150 mm/s max speed, direct drive extruder).
互換性なしadvanced
互換性なし
The Creality Ender 3 S1 has a max nozzle temperature of 260°C, which may be below the minimum recommended 370°C for PEEK. Printing may be possible at the lower end of the temperature range but results may be suboptimal. The max bed temperature of 100°C is below the recommended 130°C for PEEK. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 370-420°C |
| Printer Max Nozzle | 260°C |
| Filament Bed Requirement | 130-160°C |
| Printer Max Bed | 100°C |
代わりにすること
- Your printer's hotend maxes out at 260°C, but PEEK needs at least 370°C. No amount of tuning can overcome this hardware limitation.
- Your printer's bed maxes out at 100°C, but PEEK needs at least 130°C for reliable adhesion.
- Try a compatible filament for your Creality Ender 3 S1 — PLA, PETG, and ABS are good options.
- If you need PEEK specifically, you'll need a printer with an all-metal hotend rated for 370°C+ nozzle and 130°C+ heated bed.
PEEK Requirements
PEEK Properties
| Nozzle Range | 370-420°C |
| Bed Range | 130-160°C |
| Speed Range | 15-30 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 150°C / 6h |
Creality Ender 3 S1 Specs
| Build Volume | 220 x 220 x 270 mm |
| Max Speed | 150 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
PEEK一目でわかる
強み
- Heat resistance up to 250°C continuous
- Exceptional chemical resistance
- Aerospace and medical grade material
- Biocompatible grades available
弱点
- Requires specialized printer (400°C+ hotend, heated enclosure)
- Extremely expensive (~$300-700/kg)
- Needs heated chamber at 120°C+
- Cannot be printed on consumer-grade machines
パーソナライズされたAI設定が欲しいですか？
あなたの正確なセットアップと印刷内容を説明してください。3DSearchのAIエキスパートが数秒であなたのCreality Ender 3 S1用のPEEKカスタムスライサー設定を生成します。
3DSearchを試す →ソース: Based on Creality support documentation, community testing data, manufacturer recommended ranges. フィラメント仕様とプリンターハードウェア制限から計算。