Matte PLA Settings for Bambu Lab X1 Carbon
Recommended slicer settings for printing Matte PLA on the Bambu Lab X1 Carbon (256 x 256 x 256 mm build volume, 500 mm/s max speed, direct drive extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 210°C | 195-225°C |
| 热床温度 | 58°C | 50-65°C |
| 首层喷嘴 | 215°C | +5°C above normal |
| 首层热床 | 63°C | +5°C above normal |
| 打印速度 | 50 mm/s | 40-60 mm/s |
| 首层速度 | 20 mm/s | 25-50% of normal |
| 外壁速度 | 38 mm/s | 70-80% of normal |
| 空走速度 | 90 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 2-3 | Perimeters/shells |
| 顶层/底层 | 3-4 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 0.8-1.2 mm | Direct drive |
| 回抽速度 | 40 mm/s | Direct drive |
开始打印前
打印质量预设
Three presets for common use cases with Matte PLA on the Bambu Lab X1 Carbon.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 60 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 50 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 40 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
哑光 PLA 与普通 PLA 相同方式粘合。干净的 PEI 片(光滑或有纹理)完美工作。对于玻璃热床,使用胶棒或发胶。每次打印前用 IPA 清洁。
温度调校指南
Nozzle: 210°C
Range: 195-225°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 58°C
Range: 50-65°C. Printer max: 120°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Bambu Lab X1 Carbon 上打印 Matte PLA 的问题排查
Matte PLA 使用技巧
哑光 PLA 隐藏层线比有光泽 PLA 更好 -- 适合想要清晰外观的展示打印
在 200-215°C 打印;哑光外观在过高温度时看起来不均匀
储存方式与普通 PLA 相同:密闭容器配干燥剂
哑光 PLA 因其无反射表面而打磨和涂漆效果很好
支撑设置
For prints requiring supports with Matte PLA, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Bambu Lab X1 Carbon Specs
| Build Volume | 256 x 256 x 256 mm |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 120°C |
| Extruder | Direct Drive |
Matte PLA Properties
| Nozzle Range | 195-225°C |
| Bed Range | 50-65°C |
| Speed Range | 40-60 mm/s |
| Difficulty | beginner |
| Drying | Not required |
| Enclosure | Not needed |
Matte PLA 速览
优势
- Beautiful non-reflective matte surface finish
- Hides layer lines better than standard PLA
- Same ease of printing as PLA
- Available in wide color range
劣势
- Slightly weaker than standard PLA
- Surface scratches more visibly
- More expensive than regular PLA
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Bambu Lab X1 Carbon 搭配 Matte PLA 生成定制切片参数。
试用 3DSearch →来源： Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。