Silk PLA Settings for Bambu Lab H2C
Recommended slicer settings for printing Silk PLA on the Bambu Lab H2C (330 x 320 x 325 mm build volume, 1000 mm/s max speed, direct drive extruder).
Конфигурация слайсера
Скопируй эти значения в свой слайсер (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Параметр | Значение | Диапазон |
|---|---|---|
| Температура сопла | 223°C | 215-230°C |
| Температура стола | 65°C | 60-70°C |
| Сопло первого слоя | 228°C | +5°C above normal |
| Стол первого слоя | 70°C | +5°C above normal |
| Скорость печати | 40 mm/s | 30-50 mm/s |
| Скорость первого слоя | 15 mm/s | 25-50% of normal |
| Скорость стен | 30 mm/s | 70-80% of normal |
| Скорость холостого хода | 75 mm/s | 120-150% of print speed |
| Высота слоя | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Количество стен | 2-3 | Perimeters/shells |
| Верхние/нижние слои | 3-4 | Solid layers |
| Вентилятор охлаждения | 100% | From layer 2+ |
| Расстояние втягивания | 0.8-1.2 mm | Direct drive |
| Скорость втягивания | 40 mm/s | Direct drive |
Перед печатью
Профили качества печати
Three presets for common use cases with Silk PLA on the Bambu Lab H2C.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 50 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 40 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 30 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Адгезия стола
Silk PLA прилипает как обычный PLA. Шёлковая поверхность не влияет на прилипание.
Руководство по регулировке температуры
Nozzle: 223°C
Range: 215-230°C. Printer max: 350°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 65°C
Range: 60-70°C. Printer max: 120°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Устранение неполадок Silk PLA на Bambu Lab H2C
Советы профессионалов для Silk PLA
Silk PLA имеет красивую матовую шёлковую поверхность
Печатай при температурах, аналогичных обычному PLA (200-220°C)
Шёлковая поверхность эстетична - без влияния на функцию
Храни как обычный PLA
Материал идеален для декоративных деталей с элегантной поверхностью
Параметры поддержки
For prints requiring supports with Silk PLA, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Bambu Lab H2C Specs
| Build Volume | 330 x 320 x 325 mm |
| Max Speed | 1000 mm/s |
| Max Nozzle Temp | 350°C |
| Max Bed Temp | 120°C |
| Extruder | Direct Drive |
Silk PLA Properties
| Nozzle Range | 215-230°C |
| Bed Range | 60-70°C |
| Speed Range | 30-50 mm/s |
| Difficulty | beginner |
| Drying | Not required |
| Enclosure | Not needed |
Silk PLA с первого взгляда
Сильные стороны
- Beautiful glossy, metallic-like finish
- Very popular for decorative prints
- Available in many vibrant colors
- Easy to print (PLA base)
- Stunning visual results with minimal effort
Слабые стороны
- More brittle than regular PLA
- Not suitable for functional parts (purely decorative)
- Medium speeds needed for best sheen
- Slightly higher print temperature than PLA
Хочешь персонализированные параметры ИИ?
Опиши свою точную конфигурацию и то, что ты печатаешь. Эксперт ИИ 3DSearch генерирует пользовательские параметры слайсера для твоего Bambu Lab H2C с Silk PLA за секунды.
Попробуй 3DSearch →Источники: Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. Значения рассчитаны на основе спецификаций филамента и ограничений аппаратного обеспечения принтера.