PC-ABS Settings for Anycubic Kobra 3
Recommended slicer settings for printing PC-ABS on the Anycubic Kobra 3 (250 x 250 x 260 mm build volume, 600 mm/s max speed, direct drive extruder).
Slicer Yapılandırması
Bu değerleri slicer'ına (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio) kopyala| Ayar | Değer | Aralık |
|---|---|---|
| Nozzle Sıcaklığı | 265°C | 250-280°C |
| Platform Sıcaklığı | 108°C | 100-115°C |
| İlk Katman Nozzle | 270°C | +5°C above normal |
| İlk Katman Platform | 110°C | +2°C above normal |
| Baskı Hızı | 40 mm/s | 30-50 mm/s |
| İlk Katman Hızı | 15 mm/s | 25-50% of normal |
| Duvar Hızı | 30 mm/s | 70-80% of normal |
| Hareket Hızı | 75 mm/s | 120-150% of print speed |
| Katman Yüksekliği | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Duvar Sayısı | 2-3 | Perimeters/shells |
| Üst/Alt Katmanlar | 3-4 | Solid layers |
| Soğutma Vantilatörü | 100% | From layer 2+ |
| Geri Çekilme Mesafesi | 0.8-1.2 mm | Direct drive |
| Geri Çekilme Hızı | 40 mm/s | Direct drive |
Yazdırmadan Önce
Baskı Kalitesi Profilleri
Three presets for common use cases with PC-ABS on the Anycubic Kobra 3.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 50 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 40 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 30 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Platform Yapışması
PC/ABS PEI levhalarına ve ABS reçinesi ile cam yatağa iyi yapışır. Yapışma ABS'ye benzer ek sertlik ile.
Sıcaklık Ayarlama Rehberi
Nozzle: 265°C
Range: 250-280°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 108°C
Range: 100-115°C. Printer max: 110°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
PC-ABS ile Anycubic Kobra 3 üzerinde sorun giderme
PC-ABS için Pro İpuçları
PC/ABS, 270-310°C nozzle sıcaklığı gerektirir
Isıtmalı kasa önemlidir
En iyi kalite için yavaş yazdır - 30-40 mm/s
PC/ABS saf ABS'den daha esnek ve PC'den daha şeffaftır
Malzeme yüksek dayanıklılık şeffaf parçalar için idealdir
Destek Ayarları
For prints requiring supports with PC-ABS, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Anycubic Kobra 3 Specs
| Build Volume | 250 x 250 x 260 mm |
| Max Speed | 600 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 110°C |
| Extruder | Direct Drive |
PC-ABS Properties
| Nozzle Range | 250-280°C |
| Bed Range | 100-115°C |
| Speed Range | 30-50 mm/s |
| Difficulty | advanced |
| Drying | 80°C / 8h |
| Enclosure | Recommended |
PC-ABS Bir Bakışta
Güçlü Yönleri
- Combines PC toughness with ABS workability
- Excellent impact resistance
- Good heat resistance (~115°C)
- Can be acetone-smoothed like ABS
Zayıf Yönleri
- Requires enclosed printer
- Emits fumes — ventilation needed
- Warps without proper enclosure temperature
- Needs all-metal hotend
Kişiselleştirilmiş yapay zeka ayarları ister misin?
Tam kurulumunu ve ne yazdırdığını açıkla. 3DSearch'ün yapay zeka uzmanı saniyeler içinde PC-ABS ile Anycubic Kobra 3 için özel slicer ayarları oluşturuyor.
3DSearch'ü dene →Kaynaklar: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Değerler filament belirtimleri ve yazıcı donanım sınırlarından hesaplanmıştır.