TPC Settings for Anycubic Kobra 2 Neo
Recommended slicer settings for printing TPC on the Anycubic Kobra 2 Neo (220 x 220 x 250 mm build volume, 250 mm/s max speed, direct drive extruder).
Slicer-Konfiguration
Kopiere diese Werte in deinen Slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Einstellung | Wert | Bereich |
|---|---|---|
| Düsentemperatur | 225°C | 210-240°C |
| Heizbetttemperatur | 50°C | 40-60°C |
| Erste Schicht Düse | 230°C | +5°C above normal |
| Erste Schicht Heizbett | 55°C | +5°C above normal |
| Druckgeschwindigkeit | 23 mm/s | 15-30 mm/s |
| Erste Schicht Geschwindigkeit | 15 mm/s | 25-50% of normal |
| Wandgeschwindigkeit | 17 mm/s | 70-80% of normal |
| Verfahrgeschwindigkeit | 45 mm/s | 120-150% of print speed |
| Schichthöhe | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Wandanzahl | 3-4 | Perimeters/shells |
| Oben/Unten Schichten | 5-6 | Solid layers |
| Kühlventilator | 100% | From layer 2+ |
| Rückzugsdistanz | 0.8-1.2 mm | Direct drive |
| Rückzugsgeschwindigkeit | 40 mm/s | Direct drive |
Vor dem Drucken
Druckqualität Profile
Three presets for common use cases with TPC on the Anycubic Kobra 2 Neo.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 30 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 23 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 15 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Haftung des Heizbetts
TPC haftet auf PEI-Blechen und Glasbetten. Die Haftung ist ähnlich wie TPU.
Temperatur-Abstimmungsanleitung
Nozzle: 225°C
Range: 210-240°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 110°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Fehlerbehebung TPC auf Anycubic Kobra 2 Neo
Pro-Tipps für TPC
TPC ist ein thermoplastisches Copolyester - flexible wie TPU aber etwas steifer
Drucke langsam - 20-40 mm/s
Direct Drive wird stark empfohlen
Minimiere Retraction - 0.5-1mm ist genug
Das Material ist ideal für flexible Teile
Support-Einstellungen
For prints requiring supports with TPC, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Anycubic Kobra 2 Neo Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 250 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 110°C |
| Extruder | Direct Drive |
TPC Properties
| Nozzle Range | 210-240°C |
| Bed Range | 40-60°C |
| Speed Range | 15-30 mm/s |
| Difficulty | intermediate |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPC auf einen Blick
Stärken
- Flexible co-polyester — better chemical resistance than TPU
- Good UV resistance for outdoor flexible parts
- Better printability than TPE
- Good temperature resistance
Schwächen
- Less flexible than TPU at same hardness
- More expensive than TPU
- Limited brand availability
- Fewer color options
Möchtest du personalisierte KI-Einstellungen?
Beschreibe dein genaues Setup und was du druckst. 3DSearch's KI-Experte erzeugt in Sekunden individuelle Slicer-Einstellungen für deinen Anycubic Kobra 2 Neo mit TPC.
3DSearch ausprobieren →Quellen: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Werte berechnet aus Filament-Spezifikationen und Drucker-Hardware-Limits.