PC Settings for Bambu Lab A1 Mini
Recommended slicer settings for printing PC on the Bambu Lab A1 Mini (180 x 180 x 180 mm build volume, 500 mm/s max speed, direct drive extruder).
Несовместимоadvanced
Несовместимо
The max bed temperature of 80°C is below the recommended 100°C for PC. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 260-310°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 100-120°C |
| Printer Max Bed | 80°C |
Что делать вместо этого
- Your printer's bed maxes out at 80°C, but PC needs at least 100°C for reliable adhesion.
- Try a compatible filament for your Bambu Lab A1 Mini — PLA, PETG, and ABS are good options.
- If you need PC specifically, you'll need a printer with a hotend capable of 260°C+ nozzle and 100°C+ heated bed.
PC Requirements
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 80°C / 10h |
Bambu Lab A1 Mini Specs
| Build Volume | 180 x 180 x 180 mm |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 80°C |
| Extruder | Direct Drive |
PC с первого взгляда
Сильные стороны
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
Слабые стороны
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
Хочешь персонализированные параметры ИИ?
Опиши свою точную конфигурацию и то, что ты печатаешь. Эксперт ИИ 3DSearch генерирует пользовательские параметры слайсера для твоего Bambu Lab A1 Mini с PC за секунды.
Попробуй 3DSearch →Источники: Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. Значения рассчитаны на основе спецификаций филамента и ограничений аппаратного обеспечения принтера.