PC-ABS Settings for Creality CR-10 Smart Pro
Recommended slicer settings for printing PC-ABS on the Creality CR-10 Smart Pro (300 x 300 x 400 mm build volume, 100 mm/s max speed, direct drive extruder).
Slicer-configuratie
Kopieer deze waarden naar je slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Instelling | Waarde | Bereik |
|---|---|---|
| Mondstuktemperatuur | 265°C | 250-280°C |
| Bedtemperatuur | 100°C | 100-115°C |
| Eerste laag mondstuk | 270°C | +5°C above normal |
| Eerste laag bed | 100°C | At printer max |
| Afdruksnelheid | 40 mm/s | 30-50 mm/s |
| Eerste laag snelheid | 15 mm/s | 25-50% of normal |
| Muursnelheid | 30 mm/s | 70-80% of normal |
| Reissnelheid | 75 mm/s | 120-150% of print speed |
| Laagdikte | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Muurantal | 2-3 | Perimeters/shells |
| Boven-/onderlagen | 3-4 | Solid layers |
| Koelventilator | 100% | From layer 2+ |
| Intrekngsafstand | 0.8-1.2 mm | Direct drive |
| Intreksnelheid | 40 mm/s | Direct drive |
Voordat je afdrukt
Afdrukprofielen kwaliteit
Three presets for common use cases with PC-ABS on the Creality CR-10 Smart Pro.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 50 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 40 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 30 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Adhesie bed
PC/ABS hecht goed aan PEI-platen en met ABS-slijm op glazen bedden. Hechting is vergelijkbaar met ABS met extra stevigheid.
Temperatuurafstemmingsgids
Nozzle: 265°C
Range: 250-280°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 100-115°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Problemen oplossen PC-ABS op Creality CR-10 Smart Pro
Pro tips voor PC-ABS
PC/ABS vereist 270-310°C nozzletemperatuur
Verwarmd omhulsel is belangrijk
Druk langzaam - 30-40 mm/s voor beste kwaliteit
PC/ABS is taaier dan pure ABS en transparanter dan PC
Materiaal is ideaal voor high-sterkte transparante onderdelen
Ondersteuningsinstellingen
For prints requiring supports with PC-ABS, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality CR-10 Smart Pro Specs
| Build Volume | 300 x 300 x 400 mm |
| Max Speed | 100 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
PC-ABS Properties
| Nozzle Range | 250-280°C |
| Bed Range | 100-115°C |
| Speed Range | 30-50 mm/s |
| Difficulty | advanced |
| Drying | 80°C / 8h |
| Enclosure | Recommended |
PC-ABS in één oogopslag
Sterke punten
- Combines PC toughness with ABS workability
- Excellent impact resistance
- Good heat resistance (~115°C)
- Can be acetone-smoothed like ABS
Zwakke punten
- Requires enclosed printer
- Emits fumes — ventilation needed
- Warps without proper enclosure temperature
- Needs all-metal hotend
Wil je gepersonaliseerde AI-instellingen?
Beschrijf je exacte setup en wat je afdrukt. 3DSearch's AI-expert genereert in seconden aangepaste slicer-instellingen voor je Creality CR-10 Smart Pro met PC-ABS.
Probeer 3DSearch →Bronnen: Based on Creality support documentation, community testing data, manufacturer recommended ranges. Waarden berekend op basis van filamentspecificaties en printerhard warelimiet.