TPC Settings for Bambu Lab X1 Carbon
Recommended slicer settings for printing TPC on the Bambu Lab X1 Carbon (256 x 256 x 256 mm build volume, 500 mm/s max speed, direct drive extruder).
הגדרות Slicer
העתק את הערכים האלה ל-Slicer שלך (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| הגדרה | ערך | טווח |
|---|---|---|
| טמפרטורת חרירון | 225°C | 210-240°C |
| טמפרטורת משטח | 50°C | 40-60°C |
| חרירון בשכבה ראשונה | 230°C | +5°C above normal |
| משטח בשכבה ראשונה | 55°C | +5°C above normal |
| מהירות הדפסה | 23 mm/s | 15-30 mm/s |
| מהירות שכבה ראשונה | 15 mm/s | 25-50% of normal |
| מהירות דפנות | 17 mm/s | 70-80% of normal |
| מהירות תנועה | 45 mm/s | 120-150% of print speed |
| גובה שכבה | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| מספר דפנות | 3-4 | Perimeters/shells |
| שכבות עליונות/תחתונות | 5-6 | Solid layers |
| מאוורר קירור | 100% | From layer 2+ |
| מרחק נסיגה | 0.8-1.2 mm | Direct drive |
| מהירות נסיגה | 40 mm/s | Direct drive |
לפני שמדפיסים
פרופילי איכות הדפסה
Three presets for common use cases with TPC on the Bambu Lab X1 Carbon.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 30 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 23 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 15 mm/s | 20-30% | Miniatures, display pieces, fine detail |
היצמדות למשטח
TPC (thermoplastic co-polyester elastomer) adheres well to PEI sheets. Similar adhesion to TPU — flexible filaments grip build surfaces naturally. Use glue stick on glass beds.
מדריך כיוון טמפרטורה
Nozzle: 225°C
Range: 210-240°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 120°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
פתרון תקלות TPC על Bambu Lab X1 Carbon
טיפים מקצועיים ל-TPC
TPC is a semi-flexible engineering material with good chemical resistance
Print like TPU but at slightly higher temperatures (220-240°C)
Dry at 60°C for 6-8 hours before printing; TPC is moisture-sensitive
TPC is a good middle ground between rigid PETG and fully flexible TPU
הגדרות תמיכות
For prints requiring supports with TPC, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Bambu Lab X1 Carbon Specs
| Build Volume | 256 x 256 x 256 mm |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 120°C |
| Extruder | Direct Drive |
TPC Properties
| Nozzle Range | 210-240°C |
| Bed Range | 40-60°C |
| Speed Range | 15-30 mm/s |
| Difficulty | intermediate |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPC במבט מהיר
יתרונות
- Flexible co-polyester — better chemical resistance than TPU
- Good UV resistance for outdoor flexible parts
- Better printability than TPE
- Good temperature resistance
חסרונות
- Less flexible than TPU at same hardness
- More expensive than TPU
- Limited brand availability
- Fewer color options
רוצה הגדרות AI מותאמות אישית?
תאר את ההגדרה המדויקת שלך ואת מה שאתה מדפיס. מומחה ה-AI של 3DSearch מייצר הגדרות סלייסר מותאמות עבור ה-Bambu Lab X1 Carbon שלך עם TPC תוך שניות.
נסה את 3DSearch →מקורות: Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. הערכים חושבו ממפרטי הפילמנט וממגבלות החומרה של המדפסת.