PP Settings for Markforged FX20
Recommended slicer settings for printing PP on the Markforged FX20 (525 x 400 x 400 mm build volume, 250 mm/s max speed, direct drive extruder).
Non compatibleadvanced
Non compatible
The max bed temperature of 0°C is below the recommended 85°C for PP. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 220-250°C |
| Printer Max Nozzle | 385°C |
| Filament Bed Requirement | 85-100°C |
| Printer Max Bed | N/A |
Que faire à la place
- Your printer's bed maxes out at 0°C, but PP needs at least 85°C for reliable adhesion.
- Try a compatible filament for your Markforged FX20 — PLA, PETG, and ABS are good options.
- If you need PP specifically, you'll need a printer with a hotend capable of 220°C+ nozzle.
PP Requirements
PP Properties
| Nozzle Range | 220-250°C |
| Bed Range | 85-100°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Not needed |
| Drying | 55°C / 6h |
Markforged FX20 Specs
| Build Volume | 525 x 400 x 400 mm |
| Max Speed | 250 mm/s |
| Max Nozzle Temp | 385°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
PP en un coup d'œil
Points forts
- Chemically inert — resists most solvents and acids
- Flexible living hinges
- Fatigue resistant — can be bent repeatedly
- Food-safe and lightweight
Points faibles
- Terrible bed adhesion — needs PP tape or packing tape
- Warps severely
- Very difficult to bond or glue
- Limited color availability
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Markforged FX20 avec PP en quelques secondes.
Essayer 3DSearch →Sources : Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.