ABS Settings for Markforged FX20
Recommended slicer settings for printing ABS on the Markforged FX20 (525 x 400 x 400 mm build volume, 250 mm/s max speed, direct drive extruder).
Non compatibleintermediate
Non compatible
The max bed temperature of 0°C is below the recommended 95°C for ABS. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 230-260°C |
| Printer Max Nozzle | 385°C |
| Filament Bed Requirement | 95-110°C |
| Printer Max Bed | N/A |
Que faire à la place
- Your printer's bed maxes out at 0°C, but ABS needs at least 95°C for reliable adhesion.
- Try a compatible filament for your Markforged FX20 — PLA, PETG, and ABS are good options.
- If you need ABS specifically, you'll need a printer with a hotend capable of 230°C+ nozzle.
ABS Requirements
ABS Properties
| Nozzle Range | 230-260°C |
| Bed Range | 95-110°C |
| Speed Range | 30-70 mm/s |
| Difficulty | intermediate |
| Enclosure | Required |
| Drying | 77°C / 4h |
Markforged FX20 Specs
| Build Volume | 525 x 400 x 400 mm |
| Max Speed | 250 mm/s |
| Max Nozzle Temp | 385°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
ABS en un coup d'œil
Points forts
- Good heat resistance (softens ~105C)
- Good impact resistance
- Can be acetone-smoothed for glossy finish
- Widely used classic engineering plastic
- Good for functional indoor parts
Points faibles
- Warps aggressively without enclosure
- Emits styrene fumes (ventilation needed)
- Poor UV resistance (yellows in sunlight)
- Requires high bed temperature
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Markforged FX20 avec ABS en quelques secondes.
Essayer 3DSearch →Sources : Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.