Copper-fill PLA Settings for Markforged Onyx Pro
Recommended slicer settings for printing Copper-fill PLA on the Markforged Onyx Pro (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
Nicht kompatibelintermediate
Nicht kompatibel
The max bed temperature of 0°C is below the recommended 50°C for Copper-fill PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 195-220°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 50-60°C |
| Printer Max Bed | N/A |
Was du stattdessen tun kannst
- Your printer's bed maxes out at 0°C, but Copper-fill PLA needs at least 50°C for reliable adhesion.
- Try a compatible filament for your Markforged Onyx Pro — PLA, PETG, and ABS are good options.
- If you need Copper-fill PLA specifically, you'll need a printer with a hotend capable of 195°C+ nozzle.
Copper-fill PLA Requirements
Copper-fill PLA Properties
| Nozzle Range | 195-220°C |
| Bed Range | 50-60°C |
| Speed Range | 20-40 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Onyx Pro Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Copper-fill PLA auf einen Blick
Stärken
- Contains real copper particles — feels metallic
- Can be polished to a real copper sheen
- Develops natural patina over time
- Much heavier than standard PLA
Schwächen
- Hardened nozzle recommended (metal particles)
- Must print slowly to avoid clogs
- Expensive (~$40-60/kg)
- Brittle compared to standard PLA
Möchtest du personalisierte KI-Einstellungen?
Beschreibe dein genaues Setup und was du druckst. 3DSearch's KI-Experte erzeugt in Sekunden individuelle Slicer-Einstellungen für deinen Markforged Onyx Pro mit Copper-fill PLA.
3DSearch ausprobieren →Quellen: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Werte berechnet aus Filament-Spezifikationen und Drucker-Hardware-Limits.