Carbon Fiber PLA Settings for Markforged Onyx Pro
Recommended slicer settings for printing Carbon Fiber PLA on the Markforged Onyx Pro (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
Non compatibleintermediate
Non compatible
The max bed temperature of 0°C is below the recommended 50°C for Carbon Fiber PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 200-230°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 50-65°C |
| Printer Max Bed | N/A |
Que faire à la place
- Your printer's bed maxes out at 0°C, but Carbon Fiber PLA needs at least 50°C for reliable adhesion.
- Try a compatible filament for your Markforged Onyx Pro — PLA, PETG, and ABS are good options.
- If you need Carbon Fiber PLA specifically, you'll need a printer with a hotend capable of 200°C+ nozzle.
Carbon Fiber PLA Requirements
Carbon Fiber PLA Properties
| Nozzle Range | 200-230°C |
| Bed Range | 50-65°C |
| Speed Range | 30-50 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Onyx Pro Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Carbon Fiber PLA en un coup d'œil
Points forts
- Much stiffer than regular PLA
- Reduced warping compared to PLA
- Professional matte surface finish
- Ideal for drone frames, brackets, fixtures
- Lightweight with structural rigidity
Points faibles
- Requires hardened steel nozzle (destroys brass)
- More brittle than regular PLA
- 25-50% slower print speeds needed
- Does not add tensile strength (short fibers)
- Use 0.5mm+ nozzle to prevent clogging
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Markforged Onyx Pro avec Carbon Fiber PLA en quelques secondes.
Essayer 3DSearch →Sources : Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.